|
Also the phone can dial out from behind the
PIX…but obviously not receive calls. Bill From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Bill Gibbs I have a Polycom 501 that works great from behind simple
firewalls, like Dlink, etc however behind a Cisco PIX Firewall I see the
register messages for the extensions on the Asterisk CLI but when I do a sip
show peers I see: 702/702
x.x.x.x D N
54297 UNREACHABLE 701/701
x.x.x.x D N
54297 UNREACHABLE 700/700
x.x.x.x D N
54297 UNREACHABLE But I see stuff like n Registered SIP
'702' at x.x.x.x port 54297 expires 60 I have a single phone with multiple extensions in the
example above. As a test I changed that phone to a single extension
(700), I see the Registered line but it still says UNREACHABLE. I know the Asterisk config is good because every device
(soft, hard phone) works and I know the NAT works because I’ve tested
that out. So…I’m thinking it has something to do with the
PIX. Any ideas? Bill |
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
