Hello all. I have here a TE110P (configured as E1) and a TDM400P (with four
X100P - FXS). Both boards are recognized by the operating system as showed
above:
0000:08:00.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN interface
Subsystem: Unknown device b1d9:0003
Flags: bus master, medium devsel, latency 64, IRQ 169
I/O ports at e800 [size=256]
Memory at febff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
0000:08:01.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
interface
Subsystem: Unknown device 79fe:0001
Flags: bus master, medium devsel, latency 64, IRQ 193
I/O ports at e400 [size=256]
Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
The problem is that I cant make the both cards to work together in the same
server. Here is my /etc/zaptel.conf:
###
fxsks=1-4
loadzone = us
defaultzone=us
span=1,1,0,ccs,hdb3,crc4
bchan=5-19,21-35
dchan=20
###
When I load the wctdm module, I get this error: ZT_CHANCONFIG failed on channel
5: No such device or address (6). Its sounds like the FXS module its tring to
configure the channels 5 to 35 (E1 - ISDN Channels - TE110P card).
Anybody already saw this ? Its possible to use this two cards in the same
computer ? There is any separator that I can use in zaptel.conf to make the
load of the modules dont mistakes itself ?
Here is my versions:
Debian kernel - 2.6.8
asterisk-1.2.12.1
libpri-1.2.4
zaptel-1.2.11
Thanks
Lincoln_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
