Hi, if that means I should post my config, here goes:
zaptel: span=1,1,3,cas,hdb3,crc4 cas=1-15:1101 cas=17-31:1101 unicall.conf: protocolvariant=id,10,10 protocolend=cpe group=1 channel => 1-15 channel => 17-31 wanpipe1.conf FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 120OH TE_SIG_MODE = CAS FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = NO Josué Conti wrote:
Hi Yusuf, how are you? It orders in the list its configurations, so that let us can help. Best Regards Josue 2007/1/8, yusuf < [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>>: Hi all, I have Asterisk 1.2.10, zaptel 1.2.7, spandsp-0.0.3pre22 compiled, and a Sangoma A101, and when I make a call I get this: Jan 8 13:04:06 DEBUG[12252]: chan_unicall.c:2000 unicall_exception: Exception on 19, channel 1 Jan 8 13:04:06 WARNING[12252]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 <- 1101 [1/ 40/Seize /Idle ] Jan 8 13:04:06 WARNING[12252]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 0 on -> [2/ 40/Group I /Idle ] Jan 8 13:04:11 WARNING[12252]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 R2 prot. err. [2/ 40/Group I /DNIS ] cause 32769 - T1 timed out Jan 8 13:04:11 WARNING[12252]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 0 off -> [1/ 1/Idle /Idle ] Jan 8 13:04:11 WARNING[12252]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 1001 -> [1/ 1/Idle /Idle ] Jan 8 13:04:11 WARNING[12252]: chan_unicall.c:2644 handle_uc_event: Unicall/1 event Protocol failure -- Unicall/1 protocol error. Cause 32769 Jan 8 13:04:11 WARNING[12252]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 Channel echo cancel Jan 8 13:04:11 DEBUG[12252]: chan_unicall.c:955 unicall_disable_ec: disabled echo cancellation on channel 1 Jan 8 13:04:11 WARNING[12250]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 <- 1001 [1/ 1/Idle /Idle ] Jan 8 13:04:11 WARNING[12250]: chan_unicall.c:627 unicall_report: MFC/R2 UniCall/1 1001 -> [1/ 1/Idle /Idle ] -- Hungup 'UniCall/1-1' What does "- Unicall/1 protocol error. Cause 32769" mean, and can anyone help me. --
-- thanks, Yusuf -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users