Hi everyone! I'm having some issue trying to place calls with asterisk connected to an E1 R2 from Telmex Argentina. The other E1 port is connected to a Meridian which also uses R2 protocol. Calls sometimes fail with different error messages such as: Unicall protocol error 32773, 32772, 32769. Some other calls fail saying: Far end disconnected(cause=Destination out of order [27]) Far end disconnected(cause=User alerting, no answer [19]) Far end disconnected(cause=Switching equipment congestion [42]) Far end disconnected(cause=User busy [17])
I don't think those causes are real, because if you use another line, yo establish the call. Could it be something about timing of ABCD bits? I'm using: Asterisk 1.2.6 Zaptel 1.2.5 libmfcr2 0.0.3 libunicall 0.0.3 libsupertone 0.0.2 spandsp-0.0.3 And this is my unicall.conf: [channels] loglevel=1023 usecallerid=yes hidecallerid=no callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callerid=asreceived callreturn=yes echocancel=no echocancelwhenbridged=no echotraining=no rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no musiconhold=default protocolclass=mfcr2 protocolvariant=ar,10,4,15 protocolend=cpe group=1 context=from-zaptel channel => 1-15 channel => 17-29 loglevel=0 usecallerid=yes hidecallerid=no callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callerid=asreceived callreturn=yes echocancel=yes echocancelwhenbridged=yes echotraining=yes rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no protocolclass=mfcr2 protocolvariant=ar,0,12,12 protocolend=cpe group=2 context=hacia-afuera channel => 32-46 channel => 48-60 Thanks in advance! Greets! -- Facundo Ameal. fameal<at>gmail<dot>com Linux User #395088 Share your knowledge, use free software. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users