From: "Klaverstyn, David C" <[EMAIL PROTECTED]>
Date: Fri, 9 Feb 2007 13:30:02 +1100
Yes, I have also since put that in and I get the error:
Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring
signalling
This is not quite an error. Did you do a reload or a fresh start? I get
this warning every time I reload. Have you tried 'show modules like chan_'
or 'show channeltypes' and confirm that chan_zap is not loaded after putting
in signalling=fxs_ks (not fxsks like in zaptel.conf)?
If anything, test if wctdm is indeed configured correctly using zttool
(under your compiled source tree).
Yuan Liu
And if I put in rxwink I get this error:
Feb 8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring
rxwink
It's all very strange.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Leo Ann
Boon
Sent: Friday, 9 February 2007 12:20 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] TDM400 with 1 FXO
Klaverstyn, David C wrote:
> Hi,
>
> Yes it should, I have changed it back and is still causing the same
> problems.
>
Did you also missed out the following line in zapata.conf?
signalling=fxs_ks
Leo
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
