Exactly, Sangoma support is THE BEST! :) Best Regards
Josué 2007/3/15, John Novack <[EMAIL PROTECTED]>:
Sangoma gives excellent support Suggest you try there first They probably will want SSH access to the box. Send them an e-mail John Novack Todd H wrote: > Hi - > I just got an A200 card with 1 FXO and 1 FXS module. Sadly, I can't > make it work- currently, asterisk will not startup because of a bad > module. Below are some log files/config files. If anyone has any > suggestions, I'd appreciate it. > > I used Trixbox 2.0 and followed instructions on > (http://sangoma.editme.com/wanpipe-linux-asterisk-atHome) - no > problems running through or compiling. I also downloaded trixbox > 2.0 with sangoma drivers included directly from sangoma > (http://wiki.sangoma.com/Trixbox-1xx). I know how this list feels > about trixbox, but still, the card/configs are the same, no? Any > advice is appreciated. > thanks > Todd > > +++++++++++++++++++++++ /var/log/asterisk/full++++++++ > Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_mgcp.so]Mar 15 > 16:12:37 VERBOSE[31964] logger.c: [chan_mgcp.so] => (Media Gateway > Control Protocol (MGCP)) > Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_local.so]Mar 15 > 16:12:37 VERBOSE[31964] logger.c: [chan_local.so] => (Local Proxy > Channel) > Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_phone.so]Mar 15 > 16:12:37 VERBOSE[31964] logger.c: [chan_phone.so] => (Linux Telephony > API Support) > Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_zap.so]Mar 15 16:12:37 > VERBOSE[31964] logger.c: [chan_zap.so] => (Zapata Telephony w/PRI) > Mar 15 16:12:37 WARNING[31964] chan_zap.c: Unable to specify channel > 1: No such device or address > Mar 15 16:12:37 ERROR[31964] chan_zap.c: Unable to open channel 1: No > such device or address > here = 0, tmp->channel = 1, channel = 1 > Mar 15 16:12:37 ERROR[31964] chan_zap.c: Unable to register channel '1' > Mar 15 16:12:37 WARNING[31964] loader.c: chan_zap.so: load_module > failed, returning -1 > Mar 15 16:12:37 WARNING[31964] loader.c: Loading module chan_zap.so > failed! > [EMAIL PROTECTED] ~]# > +++++++++++++++++++++++ END /var/log/asterisk/full++++++++ > > +++++++++++++++++++++++ /var/log/messages++++++++ > [EMAIL PROTECTED] ~]# tail -20 /var/log/messages > Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_config.so] => (Text > Extension Configuration) > Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_functions.so] => > (Builtin dialplan functions) > Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_ael.so] => (Asterisk > Extension Language Compiler) > Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_dundi.so] => > (Distributed Universal Number Discovery (DUNDi)) > Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_loopback.so] => > (Loopback Switch) > Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_spool.so] => (Outgoing > Spool Support) > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_iax2.so] => (Inter > Asterisk eXchange (Ver 2)) > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_agent.so] => (Agent > Proxy Channel) > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_skinny.so] => (Skinny > Client Control Protocol (Skinny)) > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_h323.so] => (Objective > Systems H323 Channel) > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_sip.so] => (Session > Initiation Protocol (SIP)) > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_features.so] => > (Feature Proxy Channel) > Mar 15 16:24:08 asterisk1 safe_asterisk: [skipping chan_oss.so] > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_mgcp.so] => (Media > Gateway Control Protocol (MGCP)) > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_local.so] => (Local > Proxy Channel) > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_phone.so] => (Linux > Telephony API Support) > Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_zap.so] => (Zapata > Telephony w/PRI) > Mar 15 16:24:08 asterisk1 safe_asterisk: Asterisk died with code 1. > Mar 15 16:24:08 asterisk1 safe_asterisk: Automatically restarting > Asterisk. > Mar 15 16:24:08 asterisk1 asterisk: safe_asterisk startup succeeded > [EMAIL PROTECTED] ~]# > +++++++++++++++++++++++ END /var/log/messages++++++++ > > > ++++++++++++++++++++++/etc/zaptel.conf+++++++++++++++ > [EMAIL PROTECTED] ~]# more /etc/zaptel.conf > # Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not > hand edit > # Zaptel Channels Configurations (zaptel.conf) > # > loadzone=us > defaultzone=us > > # Sangoma A200 [slot:9 bus:1 span: 1] > fxsks=1 > fxsks=2 > fxoks=3 > fxoks=4 > [EMAIL PROTECTED] ~]# > ++++++++++++++++++++++END /etc/zaptel.conf+++++++++++++++ > > ++++++++++++++++++++++/etc/asterisk/zapata.conf+++++++++++++++ > [EMAIL PROTECTED] asterisk]# more zapata.conf > ; > ; Zapata telephony interface > ; > ; Configuration file > > [trunkgroups] > > [channels] > > language=en > context=from-zaptel > signalling=fxs_ks > rxwink=300 ; Atlas seems to use long (250ms) winks > ; > ; Whether or not to do distinctive ring detection on FXO lines > ; > ;usedistinctiveringdetection=yes > > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=no > echotraining=800 > rxgain=0.0 > txgain=0.0 > group=0 > callgroup=1 > pickupgroup=1 > immediate=no > > ;faxdetect=both > faxdetect=incoming > ;faxdetect=outgoing > ;faxdetect=no > > ;Include genzaptelconf configs > #include zapata-auto.conf > > group=1 > > ;Include AMP configs > #include zapata_additional.conf > > [EMAIL PROTECTED] asterisk]# > ++++++++++++++++++++++END /etc/asterisk/zapata.conf+++++++++++++++ > > ++++++++++++++++++++++/etc/asterisk/zapata-auto.conf++++++++++++++ > ; Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not > hand edit > ; Zaptel Channels Configurations (zapata.conf) > ; > ; This is not intended to be a complete zapata.conf. Rather, it is > intended > ; to be #include-d by /etc/zapata.conf that will include the global > settings > ; > callerid=asreceived > > ;Sangoma A200 [slot:9 bus:1 span: 1] > context = from-zaptel > group = 0 > signalling = fxs_ks > channel => 1 > > context = from-zaptel > group = 0 > signalling = fxs_ks > channel => 2 > > context = from-internal > group = 1 > signalling = fxo_ks > channel => 3 > > context = from-internal > group = 1 > signalling = fxo_ks > channel => 4 > ++++++++++++++++++++++/etc/asterisk/zapata-auto.conf++++++++++++++ > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
