OCOSA ListAcc wrote:
Eric,
I have watched the CLI before and it said nothing although I did change
the position of the callerid = asreceived to right below and nothing it
still shows up on the phones "asterisk" and in voice mail sent via
e-mail unknown caller:
Here is an output from a while back but it stopped so I do not know what
is up.....
-- Starting simple switch on 'Zap/1-1'
Apr 6 16:54:39 ERROR[4726]: callerid.c:276 callerid_feed: fsk_serie
made mylen
< 0 (-92)
Apr 6 16:54:39 WARNING[4726]: chan_zap.c:6255 ss_thread: CallerID feed
failed:
Success
Apr 6 16:54:39 WARNING[4726]: chan_zap.c:6299 ss_thread: CallerID
returned with
error on channel 'Zap/1-1'
These errors usually indicate that your rxgain for the FXO ports is
either too high or too low. Change the rxgain in
/etc/asterisk/zapata.conf in increments of 2 either up or down until,
but you generally don't want it to be less than -10 or greater than 10.
"reload chan_zap.so" should apply the gain changes.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
