AFAIK asterisk does't yet suport TCP, it is therefore not necessary to open TCP 5060. On Cisco PIX you might also need to disalbe SIP fixup
On 4/24/07, Lee Jenkins <[EMAIL PROTECTED]> wrote:
Noah Miller wrote: > Hi Don > >> I asked this last week but i didn't get any answer So i will >> elaborate on >> my question. I need to setup a pix 515 firewall (running 7.2.2 OS) to >> allow sip traffic thru it from a sip phone wherever i may be. The pix is >> where all my servers are colocated and i will need to connect thru it >> from >> softphones / hardphones wherever i happen to be traveling. I need help >> setting up the pix for inbound and outbound sip/iax traffic. Any help >> would be greatly appreciated. > > If you're looking for which ports to open: > > SIP: > TCP and UDP port 5060 (signalling) - can be changed in sip.conf > UDP ports 10000-20000 (RTP stream) - can be changed in rtp.conf > > IAX: > UDP Port 4569 > > Is it possible to reduce the number of ports to be opened if there is moderate traffic? -- Warm Regards, Lee _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
