Evening, My latest asterisk box is having a difficult problem. It is configured with one TE210P and TDM400P with four FXO modules. I'm running FC6.
The TE210P only has a single PRI. When the system boots, it is completely random what order the zaptel modules will get loaded in. Sometimes zttool shows the FXO as the last span, sometimes as the first. When it does load as the first, which happens more often, nothing will initialize properly. When this happens, I have to unload all the zaptel modules, and re-load them over and over again, until the hardware comes up in the correct order. The order it is loaded is in no way related to what order I load the modules on the command line. This problems makes it unlikely that asterisk will start properly if the system is rebooted. Is there something I can do to ensure the modules get loaded in the correct order? Here's my config files, if they will help... # cat /etc/zaptel.conf span=1,1,0,esf,b8zs bchan=1-23 dchan=24 defaultzone=us loadzone=us span=2,1,0,esf,b8zs bchan=25-47 dchan=48 defaultzone=us loadzone=us fxoks=49-52 defaultzone=us loadzone=us # cat /etc/asterisk/zapata.conf [channels] language=en switchtype=national context=incoming faxdetect=none signalling=pri_cpe group=1 echocancel=yes resetinterval=never channel => 1-23 language=en switchtype=national context=incoming faxdetect=none signalling=pri_cpe group=3 echocancel=yes resetinterval=never channel => 25-47 signalling=fxo_ks usecallerid=yes callerid=Fidelity Reserves group=2 threewaycalling=no context=outgoing channel => 49-52 Thanks for any help, /Mitch _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users