It's generally not recommended to put an analog and digital card in the same box, however that being said.... Try this. Write a little hack in /etc/rc.local
/sbin/modprobe wct4xxp sleep 5 /sbin/modprobe wct4xxp sleep 5 /sbin/ztcfg sleep 5 /sbin/modprobe wctdm sleep 5 /sbin/ztcfg /usr/sbin/safe_asterisk the rc.local script is loaded after all the others so it won't effect anything else, and we had some trouble with some low heat VIA motherboards so we did the modprobe twice for the PRI. Hope this helps. Cheers, Joel Hill Support Engineer Asterisk IT On Mon, 2007-04-30 at 19:14 -0500, Mitch Jackson wrote: > Evening, > > My latest asterisk box is having a difficult problem. It is > configured with one TE210P and TDM400P with four FXO modules. I'm > running FC6. > > The TE210P only has a single PRI. > > When the system boots, it is completely random what order the zaptel > modules will get loaded in. Sometimes zttool shows the FXO as the > last span, sometimes as the first. When it does load as the first, > which happens more often, nothing will initialize properly. When this > happens, I have to unload all the zaptel modules, and re-load them > over and over again, until the hardware comes up in the correct order. > The order it is loaded is in no way related to what order I load the > modules on the command line. This problems makes it unlikely that > asterisk will start properly if the system is rebooted. > > Is there something I can do to ensure the modules get loaded in the > correct order? > > Here's my config files, if they will help... > > # cat /etc/zaptel.conf > span=1,1,0,esf,b8zs > bchan=1-23 > dchan=24 > defaultzone=us > loadzone=us > > span=2,1,0,esf,b8zs > bchan=25-47 > dchan=48 > defaultzone=us > loadzone=us > > fxoks=49-52 > defaultzone=us > loadzone=us > > # cat /etc/asterisk/zapata.conf > [channels] > language=en > switchtype=national > context=incoming > faxdetect=none > signalling=pri_cpe > group=1 > echocancel=yes > resetinterval=never > channel => 1-23 > > language=en > switchtype=national > context=incoming > faxdetect=none > signalling=pri_cpe > group=3 > echocancel=yes > resetinterval=never > channel => 25-47 > > > signalling=fxo_ks > usecallerid=yes > callerid=Fidelity Reserves > group=2 > threewaycalling=no > context=outgoing > channel => 49-52 > > > > > > Thanks for any help, > > /Mitch > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users