Not necessarily. If you set the following in the sip.cfg file to 1 it will reboot even if there are no changes. The default is zero which will only reboot if there are changes.
voIpProt.SIP.specialEvent.checkSync.alwaysReboot="1"/> _______________ Kevin Savoy Business Unit Telecom Analyst 2218 4th Ave W Williston, ND 58801 Ph: 701-774-4023 Fax: 701-774-2901 http://www.novo1.com Novo 1 is a service mark of Novo 1, Inc -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Stephen Bosch Sent: Thursday, May 31, 2007 10:24 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] reset Polycom phones remotely Rob Schall wrote: > If all you need is a soft reboot to load config files and want to do it > remotely, there is no need to cut power to the phones. I know this works > on polycom 501 and 601s. I assume it would work on other polycoms as well. > > asterisk -rx 'sip notify polycom-check-cfg 192.168.1.XXX ' The trouble with this is that it only works if the configs have actually changed. The phone checks -- if there is a change, then it reboots. -Stephen- _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users