Have you checked to ensure the card in server #2 is jumpered for E1? On Thu, 2007-06-21 at 09:34 -0500, Jason K. Carter wrote:
> Hi there, > > I've got two Asterisk hosted PBX servers with Digium TE210P cards > attached by a E1 cable to Port 1 on each. On startup, both cards flash > red, alternating between ports 1 and 2. > > When server #1 loads the Zaptel module and drivers, Port 1 status LED > goes green. When server #2 loads the same module and drivers, Port 1 > status LED goes completely blank. Unloading the wct2xxp module causes > the flashing red LEDs to come back. > > I've tried swapping cable ends and cards between the two machines, but > the problem LED always stays with server #2. So, I think there is > something misconfigured with server #2, but the configuration file on > both servers is identical. > > zaptel.conf: > loadzone=uk > defaultzone=uk > > span=1,1,0,ccs,hdb3,crc4 > bchan=1-15,17-31 > dchan=16 > > span=2,0,0,ccs,hdb3,crc4 > bchan=32-46,48-62 > dchan=47 > > > Any clues what could cause a GREEN alarm on one end with a RED alarm on > the other and no LED light as soon as the wct2xxp driver is loaded? > > Thanks for the help, > Jason Carter > DLS Internet Services > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users