Yes, both cards are jumpered for E1. Any other ideas?
Jason :) James Texter wrote: > Have you checked to ensure the card in server #2 is jumpered for E1? > > On Thu, 2007-06-21 at 09:34 -0500, Jason K. Carter wrote: >> Hi there, >> >> I've got two Asterisk hosted PBX servers with Digium TE210P cards >> attached by a E1 cable to Port 1 on each. On startup, both cards flash >> red, alternating between ports 1 and 2. >> >> When server #1 loads the Zaptel module and drivers, Port 1 status LED >> goes green. When server #2 loads the same module and drivers, Port 1 >> status LED goes completely blank. Unloading the wct2xxp module causes >> the flashing red LEDs to come back. >> >> I've tried swapping cable ends and cards between the two machines, but >> the problem LED always stays with server #2. So, I think there is >> something misconfigured with server #2, but the configuration file on >> both servers is identical. >> >> zaptel.conf: >> loadzone=uk >> defaultzone=uk >> >> span=1,1,0,ccs,hdb3,crc4 >> bchan=1-15,17-31 >> dchan=16 >> >> span=2,0,0,ccs,hdb3,crc4 >> bchan=32-46,48-62 >> dchan=47 >> >> >> Any clues what could cause a GREEN alarm on one end with a RED alarm on >> the other and no LED light as soon as the wct2xxp driver is loaded? >> >> Thanks for the help, >> Jason Carter >> DLS Internet Services >> >> _______________________________________________ >> --Bandwidth and Colocation provided by Easynews.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users > > ------------------------------------------------------------------------ > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users