I have a 2621 working with asterisk. See below: sip.conf ====== [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind to context = default ; Default for incoming calls
[cisco] ; Cisco 2621 Router type=friend canreinvite=no insecure=yes host=192.168.62.1 ; address of the cisco router dtmfmode=inband context=default extensions.conf =============== ; My asterisk numbers are 600-699 (omitted from example) ; Send all calls prefixed with 9 to the cisco exten => _9.,1,Dial,sip/[EMAIL PROTECTED] relevant part of cisco configuration ==================================== [c2600-is-mz.122-13.T.bin] ! dial-peer voice 6 pots description Incoming Call from PSTN to number 6xx application session incoming called-number 6.. destination-pattern 6.. no digit-strip direct-inward-dial port 1/0:15 ! dial-peer voice 600 voip description Outgoing call to Asterisk Server for numbers 6xx application session destination-pattern 6.. session protocol sipv2 session target ipv4:192.168.62.60 session transport udp dtmf-relay rtp-nte codec g711ulaw ! dial-peer voice 9 voip description Incoming Call from Asterisk Server to number beginning with 9 application session incoming called-number 9T dtmf-relay rtp-nte codec g711ulaw ! dial-peer voice 900 pots description Outgoing call to PSTN for numbers beginning with 9 application session destination-pattern 9T no digit-strip port 1/0:15 ! -----Original Message----- From: Ariel Batista [mailto:[EMAIL PROTECTED] Sent: 03 December 2003 17:06 To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Cisco and Asterisk 2621 Ok here is a question that has gotten me stumped. I have an Asterisk system up and running. I need to connect it via the Internet to a Sip Cisco system. This is what they have. I have there IP address's and login. X-lite is able to connect to them and make a call! So I have the name right! CISCO router model: 2621 VoIP module: NM-HDA-4FXS I have done Google lookup and at the Wiki about this. What I did get is the following from them. Following in the SIP.CONF file. register => [EMAIL PROTECTED]:5060 This does not seem to work. I have also tried at the extensions.conf a setting of. exten => 380,1,Dial(SIP/[EMAIL PROTECTED]) I feel I have missed something some place or I just don't understand what to do! _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users