On Thu, 6 Sep 2007, lemmel lemmel wrote: > Thanks for your quick answer :-). > > I am a rookie in all this telephony problem, so I'll try to be verbose. > > >This function does work well. But it works if your ISDN card/driver > >supports > >it only. > I currently have a Diva Server 4BRI Rev 2, and it seems that there is DSP on > it (voice detection, and so on), so it is correct ?!
Yes. This card supports it. > >There are three possibilities to see if it really is working: > >1) when you type 'capi show channels', you should see a 'G' (for bridGed) > >in > > the isdnstate column. > I just perform this check, and I didn't see the G. > > I have two S0 connected to a PBX (Siemens) and on the other side I have my > Diva card. > > This is my capi.conf : > ********************************************************************* > [contr1] > isdnmode=did > incomingmsn=* > controller=1 > group=1 > relaxdtmf=on > faxdetect=off > accountcode= > context=toto > echocancelold=yes > devices=4 > bridge=yes > ********************************************************************* This is not quite correct. Your card actually has 4 controllers, so you need to create 4 sections (contr1, contr2, ...) with devices=2 each. !Oh, you use M-Adapter. Then your 4 channels should be working! Also, to make use of the DSPs, don't set softdtmf/relaxdtmf. And since you are using a newer driver, use echocancel=yes and leave echocancelold=off, otherwise your echo-canceler will not work. > and I putted the 2 adapters to one M-Adapter. > When I dialed 122 (on the first real adapter), I heard a voice asking for > number to dialed, and I give the 103. When the call is established, I had : > ********************************************************************* > Line-Name NTmode state i/o bproto isdnstate ton number > ---------------------------------------------------------------- > contr1#04 no Conn I trans *BS 0x00 '107'->'122' > contr1#03 no Conn O trans *BPS 0x00 'b'->'103' > contr1#02 no Disc - trans 0x00 ''->'' > contr1#01 no ----- - trans 0x00 ''->'' > ********************************************************************* > > When I made a blind transfert to the 104, I had : > Line-Name NTmode state i/o bproto isdnstate ton number > ********************************************************************* > contr1#04 no Disc - trans 0x00 ''->'' > contr1#03 no Conn O trans *BPS 0x00 'b'->'103' > contr1#02 no Conn O trans *BPS 0x00 'b'->'104' > contr1#01 no ----- - trans 0x00 ''->'' > ********************************************************************* Okay, both should be bridged. So somehow it is not activated. So please provide a log with set verbose 5 capi debug > >Also, if you have allow= set in your capi.conf (use of RTP with DIVA), the > >Line-Interconnect may not be activated (if so, please contact me). > I didn't see this parameter in my capi.conf and in the capi.conf example, is > it some specific DIVA parameter ? Where can I found those parameter, in Diva > doc ? It is a capi.conf (chan-capi) parameter and is part of the example provided by chan-capi package. So far the DIVA Server cards are the only cards which can do RTP. But it is okay to leave it off. Armin _______________________________________________ Sign up now for AstriCon 2007! September 25-28th. http://www.astricon.net/ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users