Hello,

After I turned on "full=>" in logged.conf .. I got the following:

[Nov 30 12:00:25] NOTICE[2601] chan_sip.c: Registration from 'FXS1 <sip:[EMAIL 
PROTECTED]>' failed for '172.16.1.169' - Device does not match ACL
[Nov 30 12:00:29] NOTICE[2601] chan_sip.c: Registration from 'FXS1 <sip:[EMAIL 
PROTECTED]>' failed for '172.16.1.169' - Device does not match ACL
[Nov 30 12:00:33] NOTICE[2601] chan_sip.c: Registration from 'FXS1 <sip:[EMAIL 
PROTECTED]>' failed for '172.16.1.169' - Device does not match ACL
[Nov 30 12:00:35] NOTICE[2601] chan_sip.c: Registration from 'FXO1 <sip:[EMAIL 
PROTECTED]>' failed for '172.16.1.169' - Device does not match ACL
[Nov 30 12:00:35] NOTICE[2601] chan_sip.c: Registration from 'FXO1 <sip:[EMAIL 
PROTECTED]>' failed for '172.16.1.169' - Device does not match ACL
[Nov 30 12:00:36] NOTICE[2601] chan_sip.c: Registration from 'FXO1 <sip:[EMAIL 
PROTECTED]>' failed for '172.16.1.169' - Device does not match ACL
any idea or clue?
Thanks a lot in advance
Regards
Winanjaya

  ----- Original Message ----- 
  From: Vivek Shrivastava 
  To: Newbie 
  Cc: Asterisk Users Mailing List - Non-Commercial Discussion 
  Sent: Saturday, December 01, 2007 11:50 AM
  Subject: Re: [asterisk-users] Registration state: Failed


  well, then i would recommend to see "full" log in debug mode that might give 
some clue. if you have not done this before you can uncomment line starting 
with "full=>" in the logger.conf... the log will be the usual 
/var/log/asterisk/ directory. 

  Thanks,

  Vivek 

   
  On 11/30/07, Newbie <[EMAIL PROTECTED]> wrote: 
    Hi, 
    there is no problem with X-Lite, the problem is SPA-3102 shown:

    Line 1:
    Registration Status: Failed

    PSTN Line 1:
    Registration Status: Failed

    I also had added 1 more extension 251..then tried to call 251 from 250 by 
using X-Lite and it works perfectly.. so that's why I am sure there is no 
problem with X-Lite .. what I suspect is the problem on Registration process in 
AsteriskNow.. 

    since I am very new with this.. I don't know why this problem occurs .... 
could any body please help?

    Thanks & Regards
    Winanjaya

    [general]
    context=default
    allowoverlap=no
    bindport=5060
    bindaddr=0.0.0.0
    srvlookup=yes 
    videosupport=yes
    disallow=all
    allow=ilbc
    allow=gsm
    allow=ulaw
    allow=h261
    allow=h263
    allow=h263p
    register=998:[EMAIL PROTECTED]/998
    register=999:[EMAIL PROTECTED]/999

    [line1]
    type=peer
    host=dynamic
    defaultip=172.16.1.74
    fromuser=998
    secret=1234
    fromdomain=172.16.1.169

    [line2]
    type=peer
    host=dynamic
    defaultip=172.16.1.74
    username=999
    secret=1234
    fromdomain=172.16.1.169

Command> sip show peers

Name/username              Host            Dyn Nat ACL Port     Status          
     
pstnline1/999              (Unspecified)    D          0        Unmonitored     
      
line1                      (Unspecified)    D          0        Unmonitored     
      
250/250                    172.16.1.88      D          27778    Unmonitored     
      
2500                       (Unspecified)    D          0        Unmonitored     
      
251                        (Unspecified)    D          0        Unmonitored     
      
5 sip peers [Monitored: 0 online, 0 offline Unmonitored: 1 online, 4 offline]

 
 

     

    ----- Original Message ----- 
      From: Vivek Shrivastava 
      To: Newbie ; Asterisk Users Mailing List - Non-Commercial Discussion 
      Sent: Saturday, December 01, 2007 11:34 AM
      Subject: Re: [asterisk-users] Registration state: Failed

       
      Hi,

      x-lite has extensive debug facility you can turn that on in the advanced 
options, that probably will give better understanding as what is going on from 
x-lite side. i also have experienced the same but that involved firewall and 
NAT issues. 

      Thanks,

      Vivek

       
      On 11/30/07, Newbie <[EMAIL PROTECTED] > wrote: 
        Dear Support,

        I am running AsteriskNow + X-Lite as my SoftPhone and SPA-3102 
connected with PSTN line.

        I have 3 extensions:

        250 -> my extension
        998 -> I configured as Line 1 in SPA-3102
        999 -> I configured as PSTN Line 1 in SPA-3102

        I have created 998 and 999 to the user extension list of the AsteriskNow

        why I still got Registration state: Failed for both Line 1 status and 
PSTN Line status ?


        my topology is below:

        Users <--> AsteriskNow <--> SPA-3102 <--> PSTN line

        Please help

        Thanks  a lot in advance

        Regards
        Winanjaya



        _______________________________________________
        --Bandwidth and Colocation Provided by http://www.api-digital.com--

        asterisk-users mailing list
        To UNSUBSCRIBE or update options visit:
          http://lists.digium.com/mailman/listinfo/asterisk-users





_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to