Hi,
I am using the OS which bundled with AsteriskNow
----- Original Message -----
From: Vivek Shrivastava
To: Newbie
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Saturday, December 01, 2007 12:25 PM
Subject: Re: [asterisk-users] Registration state: Failed
Hmmm, what OS you are using,,,this could be related to "Access Control
Lists"..but i guess that is in Solaris
On 11/30/07, Newbie <[EMAIL PROTECTED]> wrote:
Hello,
After I turned on "full=>" in logged.conf .. I got the following:
[Nov 30 12:00:25] NOTICE[2601] chan_sip.c: Registration from 'FXS1
<sip:[EMAIL PROTECTED]>' failed for ' 172.16.1.169' - Device does not match ACL
[Nov 30 12:00:29] NOTICE[2601] chan_sip.c: Registration from 'FXS1 <
sip:[EMAIL PROTECTED]>' failed for ' 172.16.1.169' - Device does not match ACL
[Nov 30 12:00:33] NOTICE[2601] chan_sip.c: Registration from 'FXS1 <
sip:[EMAIL PROTECTED]>' failed for '172.16.1.169' - Device does not match ACL
[Nov 30 12:00:35] NOTICE[2601] chan_sip.c: Registration from 'FXO1 <
sip:[EMAIL PROTECTED]>' failed for ' 172.16.1.169' - Device does not match ACL
[Nov 30 12:00:35] NOTICE[2601] chan_sip.c: Registration from 'FXO1 <
sip:[EMAIL PROTECTED]>' failed for '172.16.1.169' - Device does not match ACL
[Nov 30 12:00:36] NOTICE[2601] chan_sip.c: Registration from 'FXO1 <
sip:[EMAIL PROTECTED]>' failed for ' 172.16.1.169' - Device does not match ACL
any idea or clue?
Thanks a lot in advance
Regards
Winanjaya
----- Original Message -----
From: Vivek Shrivastava
To: Newbie
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Saturday, December 01, 2007 11:50 AM
Subject: Re: [asterisk-users] Registration state: Failed
well, then i would recommend to see "full" log in debug mode that might
give some clue. if you have not done this before you can uncomment line
starting with "full=>" in the logger.conf... the log will be the usual
/var/log/asterisk/ directory.
Thanks,
Vivek
On 11/30/07, Newbie <[EMAIL PROTECTED] > wrote:
Hi,
there is no problem with X-Lite, the problem is SPA-3102 shown:
Line 1:
Registration Status: Failed
PSTN Line 1:
Registration Status: Failed
I also had added 1 more extension 251..then tried to call 251 from 250
by using X-Lite and it works perfectly.. so that's why I am sure there is no
problem with X-Lite .. what I suspect is the problem on Registration process in
AsteriskNow..
since I am very new with this.. I don't know why this problem occurs
... could any body please help?
Thanks & Regards
Winanjaya
[general]
context=default
allowoverlap=no
bindport=5060
bindaddr=0.0.0.0
srvlookup=yes
videosupport=yes
disallow=all
allow=ilbc
allow=gsm
allow=ulaw
allow=h261
allow=h263
allow=h263p
register=998:[EMAIL PROTECTED]/998
register=999:[EMAIL PROTECTED]/999
[line1]
type=peer
host=dynamic
defaultip=172.16.1.74
fromuser=998
secret=1234
fromdomain=172.16.1.169
[line2]
type=peer
host=dynamic
defaultip=172.16.1.74
username=999
secret=1234
fromdomain=172.16.1.169
Command> sip show peers
Name/username Host Dyn Nat ACL Port Status
pstnline1/999 (Unspecified) D 0 Unmonitored
line1 (Unspecified) D 0 Unmonitored
250/250 172.16.1.88 D 27778 Unmonitored
2500 (Unspecified) D 0 Unmonitored
251 (Unspecified) D 0 Unmonitored
5 sip peers [Monitored: 0 online, 0 offline Unmonitored: 1 online, 4 offline]
----- Original Message -----
From: Vivek Shrivastava
To: Newbie ; Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Saturday, December 01, 2007 11:34 AM
Subject: Re: [asterisk-users] Registration state: Failed
Hi,
x-lite has extensive debug facility you can turn that on in the
advanced options, that probably will give better understanding as what is going
on from x-lite side. i also have experienced the same but that involved
firewall and NAT issues.
Thanks,
Vivek
On 11/30/07, Newbie <[EMAIL PROTECTED] > wrote:
Dear Support,
I am running AsteriskNow + X-Lite as my SoftPhone and SPA-3102
connected with PSTN line.
I have 3 extensions:
250 -> my extension
998 -> I configured as Line 1 in SPA-3102
999 -> I configured as PSTN Line 1 in SPA-3102
I have created 998 and 999 to the user extension list of the
AsteriskNow
why I still got Registration state: Failed for both Line 1 status
and PSTN Line status ?
my topology is below:
Users <--> AsteriskNow <--> SPA-3102 <--> PSTN line
Please help
Thanks a lot in advance
Regards
Winanjaya
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
