I must have started reading this thread after you reported that you actually had an AUDIO problem rather than a RINGBACK problem.
The issue you experienced is a common one. Someday I hope Digium fixes that bug/design flaw. Fons van der Beek wrote: > Jared YESSSSS > That seems to be the problem! > > A very very long time ago I installed a X101P (an original one) and > forgot about it. > > After issuing a modprobe ztdummy, indications on the outside line > indication work as they should. > After that i configured my X101P the way it should be configured! > > And yes! now indications are the way they should be > I rebooted, I restarted asterisk and it keeps working! > > > I want to thank everyone who helped me, Thank you all!!!! > > > > Jared Smith schreef: >> On Sat, 2008-02-23 at 10:28 +0100, Fons van der Beek wrote: >> >>> I guess we are back to the fundamental problem: "no asterisk generated >>> sounds on the external call" >>> >> >> Do you have any T1/E1 cards in your system that aren't configured? If a >> zaptel card isn't taking interrupts, that would cause this same type of >> problem. >> >> > > > > ------------------------------------------------------------------------ > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- Consulting for Asterisk, Polycom, Sangoma, Digium, Cisco, LAN, WAN, QoS, T-1, PRI, Frame Relay, Linux, and network design. Based near Birmingham, AL. Now accepting clients worldwide. _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
