I forgot to mentio asterisk log this 2 errors: [Feb 26 08:38:01] ERROR[30245] chan_zap.c: Unable to get parameters [Feb 26 08:38:01] ERROR[30245] chan_zap.c: Unable to register channel '1-15'
Any hint? Thanks in advance. Andres On Tue, Feb 26, 2008 at 10:44 AM, Andres Jimenez <[EMAIL PROTECTED]> wrote: > I have spent some time this morning trying to add an Astribank to our > current Asterisk, but it failed, so I just removed the hardware, > restore the config files to the original setup and started asterisk.; > > I could see that no Zap channels are started so I did load chan_zap.so: > pbx*CLI> module load chan_zap.so > [Feb 26 10:32:18] WARNING[3809]: pbx.c:2968 ast_register_application: > Already have an application 'ZapSendKeypadFacility' > == Parsing '/etc/asterisk/zapata.conf': Found > [Feb 26 10:32:18] WARNING[3809]: chan_zap.c:904 zt_open: Unable to > specify channel 1: Device or resource busy > [Feb 26 10:32:18] ERROR[3809]: chan_zap.c:7186 mkintf: Unable to open > channel 1: Device or resource busy > here = 0, tmp->channel = 1, channel = 1 > [Feb 26 10:32:18] ERROR[3809]: chan_zap.c:10527 build_channels: Unable > to register channel '1-15' > > Fair enough. I did unloaded chan_zap.so (because of the first error) > and tried again: > > pbx*CLI> module load chan_zap.so > [Feb 26 10:32:18] WARNING[3809]: pbx.c:2968 ast_register_application: > Already have an application 'ZapSendKeypadFacility' > == Parsing '/etc/asterisk/zapata.conf': Found > [Feb 26 10:32:18] WARNING[3809]: chan_zap.c:904 zt_open: Unable to > specify channel 1: Device or resource busy > [Feb 26 10:32:18] ERROR[3809]: chan_zap.c:7186 mkintf: Unable to open > channel 1: Device or resource busy > here = 0, tmp->channel = 1, channel = 1 > [Feb 26 10:32:18] ERROR[3809]: chan_zap.c:10527 build_channels: Unable > to register channel '1-15' > > It looks like the problem is in the zap card's first channel: > > pbx:~# cat /proc/zaptel/1 > Span 1: WCT1/0 "Wildcard TE12xP Card 0" HDB3/CCS > IRQ misses: 36 > > 1 WCT1/0/1 Clear (In use) > 2 WCT1/0/2 Clear > 3 WCT1/0/3 Clear > 4 WCT1/0/4 Clear > 5 WCT1/0/5 Clear > 6 WCT1/0/6 Clear > 7 WCT1/0/7 Clear > 8 WCT1/0/8 Clear > 9 WCT1/0/9 Clear > 10 WCT1/0/10 Clear > 11 WCT1/0/11 Clear > 12 WCT1/0/12 Clear > 13 WCT1/0/13 Clear > 14 WCT1/0/14 Clear > 15 WCT1/0/15 Clear > 16 WCT1/0/16 HDLCFCS > 17 WCT1/0/17 Clear > 18 WCT1/0/18 Clear > 19 WCT1/0/19 Clear > 20 WCT1/0/20 Clear > 21 WCT1/0/21 Clear > 22 WCT1/0/22 Clear > 23 WCT1/0/23 Clear > 24 WCT1/0/24 Clear > 25 WCT1/0/25 > 26 WCT1/0/26 > 27 WCT1/0/27 > 28 WCT1/0/28 > 29 WCT1/0/29 > 30 WCT1/0/30 > 31 WCT1/0/31 > > > Is there any change any Astribank related stuff can be causing this? > > I have ensured that no Astribanks modules are loaded and even rebooted > the box, but no success. > > > pbx:~# cat /etc/zaptel.conf > # CRC off > # > loadzone = uk > defaultzone = uk > > span=1,1,0,ccs,hdb3 > bchan=1-15 > dchan=16 > bchan=17-24 > > #or this with crc on > # > #loadzone = uk > #defaultzone = uk > > #span=1,1,0,ccs,hdb3,crc4 > #bchan=1-15 > #dchan=16 > #bchan=17-24 > > pbx:~# cat /etc/asterisk/zapata.conf > language=en > internationalprefix = 00 > nationalprefix = 0 > switchtype = euroisdn > pridialplan = local > priindication = outofband > usecallerid = yes > hidecallerid = no > callwaiting = yes > usecallingpres = yes > callwaitingcallerid = yes > threewaycalling = yes > transfer = yes > cancallforward = yes > callreturn = yes > group = 1 > callgroup = 0 > pickupgroup = 0 > immediate = no > echotraining = yes > echocancel = yes > echocancelwhenbridged = no > facilityenable = yes > musiconhold = default > ;overlapdial = yes > overlapdial = no > immediate = no > txgain = -4.0 > rxgain = -4.0 > signalling = pri_cpe > channel => 1-15 > ;channel => 17-32 > channel => 17-24 > ;toneduration=100 > toneduration=300 > ;relaxdtmf=yes > > > > Thanks, > > -- > Andres Jimenez > > GPG : http://www.andresin.com/gpg/[EMAIL PROTECTED] > -- Andres Jimenez GPG : http://www.andresin.com/gpg/[EMAIL PROTECTED] _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users