On Tue, 9 Dec 2003, John Breeden wrote: > Just started putting my first * together with a tdm400p and x100p. > > Analog phones, xlite and diax I've got working. > > Just got Grandstream budgetone-100. > > The budgetone registers with * just fine. * accepts the dtmf and dials the > number. The remote phone rings. From there things go south. > > The CLI reports this: > > -- Executing StripMSD("SIP/jrb-683a", "1") in new stack > -- Executing Dial("SIP/jrb-683a", "Zap/1/9384074") in new stack > -- Called 1/9384074 > -- Zap/1-1 answered SIP/jrb-683a > WARNING[98311]: File chan_sip.c, Line 464 (retrans_pkt): Maximum retries > exceeded on call [EMAIL PROTECTED] for > seqno 52852 (Response) > -- Hungup 'Zap/1-1' > == Spawn extension (home, 9384074, 2) exited non-zero on 'SIP/jrb-683a' > > The budgetone is using a fixed ip, dtmf signaling, firmware version is > 1.0.4,17 > > My sip.conf for the budgetone is: > > [jrb] > type=friend > host=dynamic > username=jrb > secret=xxxxx > dtmfmode=rfc2833 > context=home > reinvite=no > canreinvite=no > qualify=1000 > > I can't find a solution to in the archives and I've looked at all the > documentation I can find setting up the budgetone on *. > > Any pointers would be appreciated. Thanx in advance.
I had a similar experience and called Digium, who informed me that I have to specifically add a "disallow all" and then "allow ulaw" command to my sip.conf for that extension. Ever since then, it has worked like a champ. -- Vice President of N2Net, a New Age Consulting Service, Inc. Company http://www.n2net.net Where everything clicks into place! KP-216-121-ST _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users