John Meksavan wrote: > Asterisk Users, > > I am running Asterisk-1.4.11 on a Debian "Etch" system. On an > occasion, when customer calls into my Asterisk Box, I get this error > messagefrom Asterisk "CallerID returned with error on channel Zap/3-1" , > causing all my zap channels to be busy. So, I cannot make any calls in, > nor out. I am located in the United States. > > Is there any other suggestions, besides adding "busydetect= yes" and > "busycount=8"? Any other suggestions would be appreciated. Thanks in > advance. Here is what my zapata.conf looks like: >
I had a big problem as a similar situation. Polycom phones would wig out if caller id info came in wrong or there was an error (which looking at a few CLI's with analog zap, happens fairly often). The polycoms would ring, but would not pick up the call in this case. Not if you picked up the handset and not if you hit the Answer soft key either. Took me about a month to track it down and finally was able to reproduce by performing an originate AMI command on local channel without setting caller ID. Anyway, I finally just added a conditional to the entry point of my dialplan (after property answer(), Wait(), etc) that looked at the caller id and if they were blank, I set to something like 555-555-555/UNKNOWN and the problem went away. In this case, sometimes the zap channels would get hung up as well and required a restart now. HIH -- Warm Regards, Lee "Everything I needed to learn in life, I learned selling encyclopedias door to door." _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users