I have a PRI connected to a traditional PBX using NI-2 and a typical config (further below). When I call from a SIP/IAX phone to an extension on the PBX, only the number makes it through. If I plug that same port on the PBX to a carrier the PBX presents both name and number.
Hints or pokes to relevant chapters in documentation? My config is essentially like one found here: http://www.voip-info.org/files/nortel-asterisk-0.2.pdf The author makes no reference to CNID, so I'm assuming that he wasn't bothered by it not working. Ideas? The system is a trixbox 2.6.0.7 which includes zaptel-1.4.9.2-8. ... -- Executing [EMAIL PROTECTED]:22] NoOp("SIP/3991-b7900488", "CallerID set to "Peter" <NPANXX3991>") in ne Executed application: Noop Executed application: Macro -- Executing [EMAIL PROTECTED]:12] AGI("SIP/3991-b7900488", "fixlocalprefix") in new stack -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix == Begin MixMonitor Recording SIP/3991-b7900488 -- AGI Script fixlocalprefix completed, returning 0 Executed application: AGI -- Executing [EMAIL PROTECTED]:13] Set("SIP/3991-b7900488", "OUTNUM=4342") in new stack Executed application: Set -- Executing [EMAIL PROTECTED]:14] Set("SIP/3991-b7900488", "custom=ZAP/g14") in new stack Executed application: Set -- Executing [EMAIL PROTECTED]:15] GotoIf("SIP/3991-b7900488", "1?gocall") in new stack -- Goto (macro-dialout-trunk,s,17) Executed application: GotoIf -- Executing [EMAIL PROTECTED]:17] Macro("SIP/3991-b7900488", "dialout-trunk-predial-hook|") in new stack Context 'macro-dialout-trunk-predial-hook' for macro 'dialout-trunk-predial-hook' lacks 's' extension, priority 1 Executed application: Macro -- Executing [EMAIL PROTECTED]:18] GotoIf("SIP/3991-b7900488", "0?bypass|1") in new stack Executed application: GotoIf -- Executing [EMAIL PROTECTED]:19] GotoIf("SIP/3991-b7900488", "0?customtrunk") in new stack Executed application: GotoIf -- Executing [EMAIL PROTECTED]:20] Dial("SIP/3991-b7900488", "ZAP/g14/4342|300|") in new stack -- Requested transfer capability: 0x00 - SPEECH -- Called g14/4342 Queuing frame from PRI_EVENT_PROCEEDING on channel 0/1 span 4 -- Zap/73-1 is proceeding passing it to SIP/3991-b7900488 -- Zap/73-1 is ringing Echo cancellation already on -- Zap/73-1 answered SIP/3991-b7900488 ... zapata.conf (includes inline and comments purged) Spans 3 and 4 connect to the PBX. (Yes the restating of the defaults are redundant, but I'm willing to try any goofiness to make it work.) ------- [trunkgroups] [channels] language=en context=from-zaptel signalling=fxs_ks rxwink=300 usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no rxgain=0.0 txgain=0.0 group=0 callgroup=1 pickupgroup=1 immediate=no faxdetect=incoming group=0,11 context=from-carrier-custom callerid=asreceived usecallerid=yes hidecallerid=no switchtype = national signalling = pri_cpe pridialplan=national prilocaldialplan=national channel => 1-23 group= context=default ; Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" group=0,12 context=from-carrier-custom callerid=asreceived usecallerid=yes hidecallerid=noswitchtype = national signalling = pri_cpe pridialplan=national prilocaldialplan=national channel => 25-47 group= context=default ; Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" group=0,13 context=from-nortel-custom callerid=asreceived usecallerid=yes hidecallerid=no echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 faxdetect=incoming switchtype = national signalling = pri_net pridialplan=national prilocaldialplan=national channel => 49-71 group= context=default ; Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4" group=0,14 context=from-nortel-custom callerid=asreceived usecallerid=yes hidecallerid=no switchtype = national signalling = pri_net pridialplan=national prilocaldialplan=national channel => 73-95 group= context=default group=1 _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users