On Tue, 2008-04-29 at 23:49 -0500, Peter A Eisch wrote: > I have a PRI connected to a traditional PBX using NI-2 and a typical > config (further below). When I call from a SIP/IAX phone to an extension > on the PBX, only the number makes it through. If I plug that same port on > the PBX to a carrier the PBX presents both name and number. > > Hints or pokes to relevant chapters in documentation? My config is > essentially like one found here: > http://www.voip-info.org/files/nortel-asterisk-0.2.pdf > The author makes no reference to CNID, so I'm assuming that he wasn't > bothered by it not working.
You could set "pri debug span 1" in the Asterisk CLI (assuming that this is the first PRI span) and see if the name is actually being transmitted to the PBX. -- Jared Smith Training Manager Digium, Inc. _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users