Hi Steve;

If we give a look for the link
http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+page
there are some topics not cleared to complete the
paging senario:

1) Why to use Set(_ALERT_INFO="RA")? And how can I
know what each device take? 

2) Does the following work for Polycom:

SIPAddHeader(Call-Info:<sip:domain>\;answer-after=0)


3) Can I do paging without use Page and only by using
Dial (but I will set the previous paramters as
needed)?

4) Any configuration need to be done on the Meet Me
conference to have the Paging working fine?

Regards
Bilal

--- Steve Totaro <[EMAIL PROTECTED]>
wrote:

> Bilal,
> 
> Providing your Asterisk box has onboard sound or you
> can add a card or
> even USB sound then you will just use your Asterisk
> server to act as a
> phone basically.  It even has autoanswer so it
> should be perfect.
> 
> I think you have enough options now to act.
> 
> http://www.voip-info.org/wiki-Asterisk+tips+console
> 
> Then you need to either feed it into an AMP (Bogen
> or whatever) or buy
> speakers with built in AMPs and volume control.
> 
> Thanks,
> Steve Totaro
> 
> 
> On Tue, Apr 29, 2008 at 3:43 AM, bilal ghayyad
> <[EMAIL PROTECTED]> wrote:
> > Dear Steve;
> >
> >  Using the computer sound card is a very nice
> solution,
> >  but how to connect it to the pbx? How to connect
> it to
> >  the fxs port and give it an extension? Do I need
> an
> >  phone?
> >
> >
> >
> >  Regards
> >  Bilal
> >  --- Steve Totaro <[EMAIL PROTECTED]>
> >  wrote:
> >
> >  > Bilal,
> >  >
> >  > Geez, yes, that is how overhead paging works. 
> You
> >  > can even buy the
> >  > speakers with built in AMPs and volume control
> and
> >  > you could use your
> >  > computer's sound card.
> >  >
> >  > Thanks,
> >  > Steve Totaro
> >  >
> >  > On Mon, Apr 28, 2008 at 6:30 PM, bilal ghayyad
> >  > <[EMAIL PROTECTED]> wrote:
> >  > > I will try to see the analoge and how it can
> be
> >  > done.
> >  > >
> >  > >  About the overhead, do u mean the AMP and
> >  > speakers or
> >  > >  what?
> >  > >
> >  > >
> >  > >
> >  > >  Regards
> >  > >  Bilal
> >  > >  --- Steve Totaro
> <[EMAIL PROTECTED]>
> >  > >  wrote:
> >  > >
> >  > >  > Bilal,
> >  > >  >
> >  > >  > So you want to page through your analog
> phones,
> >  > no
> >  > >  > overhead paging.  I
> >  > >  > doubt this is possible.
> >  > >  >
> >  > >  > I think your options are an IP phones such
> as
> >  > the
> >  > >  > Polycom that
> >  > >  > supports paging or using an AMP and
> speakers
> >  > usually
> >  > >  > mounted high on
> >  > >  > the wall or flush with a tile ceiling.
> >  > >  >
> >  > >  > Thanks,
> >  > >  > Steve Totaro
> >  > >  >
> >  > >  > On Mon, Apr 28, 2008 at 11:58 AM, bilal
> ghayyad
> >  > >  > <[EMAIL PROTECTED]> wrote:
> >  > >  > > Dear Steve;
> >  > >  > >
> >  > >  > >  Already we need to use the same analoge
> >  > phones
> >  > >  > that is
> >  > >  > >  connected to the fxs ports, to do
> paging to
> >  > it.
> >  > >  > >
> >  > >  > >  What overhead?
> >  > >  > >
> >  > >  > >
> >  > >  > >
> >  > >  > >  Regards
> >  > >  > >  Bilal
> >  > >  > >  --- Steve Totaro
> >  > <[EMAIL PROTECTED]>
> >  > >  > >  wrote:
> >  > >  > >
> >  > >  > >  > Bilal,
> >  > >  > >  >
> >  > >  > >  > You will have great luck with Polycom
> >  > then, not
> >  > >  > sure
> >  > >  > >  > about others.
> >  > >  > >  > Why not go for overhead paging?  It
> will
> >  > be
> >  > >  > much
> >  > >  > >  > easier.
> >  > >  > >  >
> >  > >  > >  > Thanks,
> >  > >  > >  > Steve Totaro
> >  > >  > >  >
> >  > >  > >  > On Mon, Apr 28, 2008 at 9:24 AM,
> bilal
> >  > ghayyad
> >  > >  > >  > <[EMAIL PROTECTED]> wrote:
> >  > >  > >  > > And auto answer also will be needed
> for
> >  > IP
> >  > >  > Phones?
> >  > >  > >  > >
> >  > >  > >  > >
> >  > >  > >  > >
> >  > >  > >  > >  Regards
> >  > >  > >  > >  Bilal
> >  > >  > >  > >  --- Steve Totaro
> >  > >  > <[EMAIL PROTECTED]>
> >  > >  > >  > >  wrote:
> >  > >  > >  > >
> >  > >  > >  > >  > Bilal,
> >  > >  > >  > >  >
> >  > >  > >  > >  > Sorry to reply to my reply but
> if you
> >  > can
> >  > >  > >  > register
> >  > >  > >  > >  > multiple accounts
> >  > >  > >  > >  > and setup auto answer on one of
> those
> >  > >  > accounts,
> >  > >  > >  > it
> >  > >  > >  > >  > could work.  The
> >  > >  > >  > >  > problem is, I am not sure if
> there
> >  > are any
> >  > >  > ATAs
> >  > >  > >  > that
> >  > >  > >  > >  > have this
> >  > >  > >  > >  > ability.
> >  > >  > >  > >  >
> >  > >  > >  > >  > Thanks,
> >  > >  > >  > >  > Steve Totaro
> >  > >  > >  > >  >
> >  > >  > >  > >  > On Mon, Apr 28, 2008 at 9:06 AM,
> >  > Steve
> >  > >  > Totaro
> >  > >  > >  > >  > <[EMAIL PROTECTED]>
> >  > wrote:
> >  > >  > >  > >  > > Bilal,
> >  > >  > >  > >  > >
> >  > >  > >  > >  > >  No, I do not think that you
> can
> >  > make
> >  > >  > this
> >  > >  > >  > work.
> >  > >  > >  > >  > You would obviously
> >  > >  > >  > >  > >  need auto answer or how else
> would
> >  > the
> >  > >  > audio
> >  > >  > >  > come
> >  > >  > >  > >  > out of the speakers?
> >  > >  > >  > >  > >
> >  > >  > >  > >  > >  I thought you were talking
> about
> >  > >  > overhead
> >  > >  > >  > paging.
> >  > >  > >  > >  > >
> >  > >  > >  > >  > >  Thanks,
> >  > >  > >  > >  > >  Steve Totaro
> >  > >  > >  > >  > >
> >  > >  > >  > >  > >
> >  > >  > >  > >  > >
> >  > >  > >  > >  > >  On Mon, Apr 28, 2008 at 8:49
> AM,
> 
=== message truncated ===



      
____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to