On Wed, May 14, 2008 at 01:27:38AM +0800, Rilawich Ango wrote: > I have a queue with the following setting. > total queue member =30, autofill=1, timeout=25, monitor_format=wav49 > asterisk 1.4.18 > In busy hour, the loading of CPU reaches over 300%. At that moment, > all members are occupied and many calls are waiting in the queue. > There will be choppy and line cut at such high CPU loading.
Hi, I was having huge problems with AsteriskNow 1.0.1 which is packaged with asterisk 1.4.18(.1? not sure). Most of them came with the deploiment of our support center call queue. With only 2/3 agents and max 6/10 simultaneous calls the system goes wazaa and eat the 4 cores of the xeon 1.6 cpu, users gets stucks in 'in use' state (while normaly this flags doesn't work) and everything goes from bad to worse. I've rebuild it using etch/amd64 and manual build of asterisk 1.4.20rc2 (1.4.19.2 wasn't out and i have some IAX calls) and now everything is fine. > My questions: > 1. What is the max capacity of a server to handle a queue in term of > queue member and calls? Do you use IAX2 ? there is major improvement in this with 1.4.19.2 / 1.4.20. > 2. After every 25s, the call will be switched from agent to another > agent. Can I do something, say execute a CLI or shell command before > it switches to another agent? -- Benoit _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users