try pri_cpe instead of pri-cpe
On Thursday 19 June 2008 12:51, Eve-Ellen Cole wrote: > I'm trying to connect Asterisk 1.4.20 to Avaya Definity G3R v11.1 via a T1 > crossover, and I'm currently stuck. Anyone have any thoughts on what I > can do to get past this? > > > Asterisk side > Digium TE220B w/ green LED (using port 2) > > Zaptel.conf > span=2,1,0,esf,b8zs > bchan=25-47 > dchan=48 > loadzone = us > defaultzone=us > > Zapata.conf > context=default > switchtype=national > > ; T1 PRI to Avaya Definity G3R > context=from_pbx > signalling=pri-cpe > group=3 > channel => 25 > > > Avaya side > TN464GP > > Ds1 01C14 > Framing mode: esf > Line coding: b8zs > Signaling mode: isdn-pri > Connect: Network > Protocol version: b (national) > Near-end CSU type: other (for the T1 crossover) > > Signaling group 6 > Primary d-channel set to 01C14 > > > When I restart Asterisk, the following lines get logged to > /var/log/asterisk/messages: > > [Jun 19 12:41:37] ERROR[28093] chan_zap.c: Unknown signalling method > 'pri-cpe' > [Jun 19 12:41:37] ERROR[28093] chan_zap.c: Signalling must be specified > before any channels are. > > If I change signaling method to pri-net: > [Jun 19 12:49:42] ERROR[28184] chan_zap.c: Unknown signalling method > 'pri-net' > [Jun 19 12:49:42] ERROR[28184] chan_zap.c: Signalling must be specified > before any channels are. _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users