On Thu, Jun 19, 2008 at 4:11 PM, Steve Edwards <[EMAIL PROTECTED]> wrote: > On Thu, 19 Jun 2008, Eve-Ellen Cole wrote: > >> Right again, getting a little closer (babysteps) ... no alarms on either >> system, but when I check the pri status in the CLI, I get PRI span 2/0: >> Provisioned, Down, Active. I've searched for clues, but am not coming up >> with the next step. > > It's not my area of expertise, but I have "issues" with T1 numbering > between vendors -- what they said was 1, 2, 3, 4 turned out to be 4, > 3, 2, 1. > > You might try swapping the T1s and see what happens. > > Thanks in advance, > ------------------------------------------------------------------------ > Steve Edwards [EMAIL PROTECTED] Voice: +1-760-468-3867 PST > Newline Fax: +1-760-731-3000 >
I have actually done this with a Definity G3 but the cards were not PRI, I had to use E&M_W. This doesn't make sense to me though. Primary d-channel set to 01C14 I memory servers me correctly (and it has been a couple years) the 01 means cabinet 1, C is the slot, and 14 is the port number. I would expect it to say 01C24 for the D chan. I could be completely wrong but it is something to try and would explain why your PRI chans are not coming up. Thanks, Steve Totaro _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users