Hi Enrico. In Italy the polarity reversal is never used. I'm using the TDM400 with an FXO port in Italy with the config reported below and is working properly in any situations:
--- zaptel.conf --- fxsks=1 loadzone=it defaultzone=it --- zapata.conf --- [channels] language=en context=from-tdm-fxo signalling=fxs_ks threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes busydetect=yes busycount=6 usecallerid=yes callerid=asreceived echocancel=yes echocancelwhenbridged=no relaxdtmf=yes rxgain=3.0 txgain=0.0 amaflags=billing group=1 callgroup=1 pickupgroup=1 jbenable=yes faxdetect=no channel => 1 I'm using zaptel-1.4.6 and asterisk-1.4.20.1. I hope this could help you. Best regards, Marco Signorini. Enrico Maistro wrote: > Hi, > > I'm trying to get up and running a TDM400 with a standard italian pots > line but i'm having > problems at getting asterisk to detect when the line get answered on > outgoing calls. > > I'm using asterisk 1.6 beta 9 with zaptel 1.4.11. > > I tried with and without answeronpolarityswitch=yes but it didn't change > anything at all. > > With callprogress=yes answer get never detected. > With callprogress=no line get answered as soon as it start ringing, > regardless if someone > really answer the call. > > > Zaptel channels use fxs_ks signalling . > > Loading wctdm module with debug=1 result in: > > kernel: Freshmaker version: 73 > kernel: Freshmaker passed register test > kernel: ProSLIC on module 0, product 3, version 15 > kernel: VoiceDAA System: 04 > kernel: ISO-Cap is now up, line side: 03 rev 06 > kernel: setting FXO tx gain for card=0 to 0 > kernel: setting FXO rx gain for card=0 to 0 > kernel: DEBUG fxotxgain:0.0 fxorxgain:0.0 > kernel: Module 0: Installed -- AUTO FXO (FCC mode) > kernel: ProSLIC on module 1, product 0, version 0 > kernel: VoiceDAA System: 04 > kernel: ISO-Cap is now up, line side: 03 rev 06 > kernel: setting FXO tx gain for card=1 to 0 > kernel: setting FXO rx gain for card=1 to 0 > kernel: DEBUG fxotxgain:0.0 fxorxgain:0.0 > kernel: Module 1: Installed -- AUTO FXO (FCC mode) > kernel: ProSLIC on module 2, product 0, version 0 > kernel: Module 2: Not installed > kernel: ProSLIC on module 3, product 0, version 0 > kernel: Module 3: Not installed > kernel: Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules) > kernel: 4294908325 Polarity reversed (0 -> -1) > kernel: 4294908326 Polarity reversed (0 -> 1) > kernel: BATTERY on 1/1 (-)! > kernel: NO BATTERY on 1/2! > > Any suggestion? > Am i trying to do something that simply can't be done? > > Thanks, > Enrico Maistro > > > _______________________________________________ > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users