Hi Marco, Marco Signorini wrote: > Hi Enrico. > In Italy the polarity reversal is never used.
Good to know... at least i can stop messing with it. > I'm using the TDM400 with an FXO port in Italy with the config reported > below and is working properly in any situations: > > --- zaptel.conf --- > fxsks=1 > loadzone=it > defaultzone=it My zaptel.conf is exactly the same. > --- zapata.conf --- > [channels] > language=en > context=from-tdm-fxo > signalling=fxs_ks > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > busydetect=yes > busycount=6 > usecallerid=yes > callerid=asreceived > echocancel=yes > echocancelwhenbridged=no > relaxdtmf=yes > rxgain=3.0 > txgain=0.0 > amaflags=billing > group=1 > callgroup=1 > pickupgroup=1 > jbenable=yes > faxdetect=no > > channel => 1 My zapata.conf differs in: language = it instead of en rxgain = 0.0 instead of 3.0 jbenable = no instead of yes Unfortunatly even with your exact same configuration nothing change. > I'm using zaptel-1.4.6 and asterisk-1.4.20.1. I'll give a try with zaptel-1.4.6... > I hope this could help you. > > Best regards, > Marco Signorini. Regards, Enrico Maistro _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users