A customer has an Asterisk box with two TDM400P cards, running [EMAIL PROTECTED] 2.8, which has Asterisk 1.2.7.1 and Zaptel 1.2.5. This has been running ok for a while, with only some small issues. They have FXO ports going to analogue POTS (UK standard) lines, and SIP phones for extensions.
I just tried updating Zaptel to 1.2.26 and Asterisk to 1.2.30.1, and although the update appeared to go ok, the system would no longer detect incoming calls. It appeared not to see the ringing signal. Outgoing calls over the PSTN lines still worked fine. Does anyone know if there have been changes in the 1.2 series that affects ring detection on the TDM400P FXO ports? Any critical settings in zaptel.conf or zapata.conf? For now, I've had to revert to the original versions, in which ringing once again works fine. Cheers Tony -- Tony Mountifield Work: [EMAIL PROTECTED] - http://www.softins.co.uk Play: [EMAIL PROTECTED] - http://tony.mountifield.org _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
