Tony Mountifield wrote: > A customer has an Asterisk box with two TDM400P cards, running [EMAIL > PROTECTED] 2.8, > which has Asterisk 1.2.7.1 and Zaptel 1.2.5. This has been running ok > for a while, with only some small issues. They have FXO ports going > to analogue POTS (UK standard) lines, and SIP phones for extensions. > > I just tried updating Zaptel to 1.2.26 and Asterisk to 1.2.30.1, and > although the update appeared to go ok, the system would no longer > detect incoming calls. It appeared not to see the ringing signal. > Outgoing calls over the PSTN lines still worked fine. > > Does anyone know if there have been changes in the 1.2 series that > affects ring detection on the TDM400P FXO ports? Any critical settings > in zaptel.conf or zapata.conf? > > For now, I've had to revert to the original versions, in which ringing > once again works fine. > > Cheers > Tony >
YES! I have a 4xFXO board in Singapore. Having tried many various settings, etc., I had assumed it was the I18N of the ringtones and signalling. Does anyone know at which rev the issue appeared? regards, Drew -- Drew Gibson Systems Administrator OANDA Corporation www.oanda.com _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
