> > Steve Underwood wrote: > > > That card's haardware is not capable of providing any VoIP > > functionality. It is not full duplex. The newer JCT cards can be used, > > but they still don't work that well, due to card limitations. > >
Hi Steve, Thanks for your advice. My thought is to start this new project in the following steps: 1. Configure a very simple paltform (e.g. POTS) to prove the feasibility; 2. Demonstrate to technical management; 3. Acquire budget and resources for development works. Since Linux-based PBX server is new to us, live demonstration is more effective to raise the management's interest. I would like to use the resources currently on hand to experiment. I searched the archived mail messages and found that drivers for Dialogic are commercially available for $15 per channel? By one channel means a single loop start Telco interface? Many thanks, Patrick Wong. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users