Hello, I am trying to install my E1 card to make a conection with an Ericsson MD-110 PBX. I installed dahdi drivers as: dahdi_hardware pci:0000:04:08.0 wcte12xp- d161:8000 Wildcard TE121 ran dahdi_genconf and it created all my e1 ports. On the other side i also configured the pbx to communicate with TE121. On ericsson side, i have no error messages. On asterisk side, no error messages. But when i try to create a dahdi trunk, and dial it from asterisk , no call can be made. and also, when i try to call from ericsson side, i get line busy message as soon as i dial the number.
Is there any guide that can help me in installing that card? PS: Whatever i made in SPAN config, everytime the only thing i see was Internal clock on dahdi_tool . How can i make my e1 card master (or slave whatever) instead of internal clock?? and other thing i wonder, if i create a span like "span=1,0,0,ccs,hdb3" is it zap/g1 in zaptel(dahdi) conf menu in asteriskgui???(or freepbx) _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users