Thanks for the reply.. > You should be able to get support from the people who sold you the card. > > You need to configure 2 files (I'm looking at an old system, so they > have > the zaptel style names). > > My files are below - the thing to note is the span 1,1,0, > the second 1 tells you that the span is a timing source, externally > clocked. >
Whatever i do in timing source parameter, it still shows as internal clock on dahdi_tool. > Depending on the mode that your Ericsson is in, you may need to > change signalling=pri_cpe to signalling=pri_net > As i see other devices working with ericsson (gsm router) configured as TE (cpe) so i configured it like this too. And then created an incoming route to one of the extensions from this dahdi channel. But i got busy signal when i try to dial from ericsson side... > /etc/asterisk/zapata.conf: > > ; Configuration file > [channels] > ; > ; Default language > ; > language=en > context=ntl > switchtype=euroisdn > pridialplan=unknown > prilocaldialplan=unknown > signalling=pri_cpe > usecallerid=yes > hidecallerid=no > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > group=1 > callgroup=1 > pickupgroup=1 > ;echocancel=256 > ;channel => 1-6 > channel => 1-15,17-31 > > and /etc/zaptel.conf : > > span=1,1,0,ccs,hdb3 > bchan=1-15 > dchan=16 > bchan=17-31 > loadzone = uk > > > On 16 Mar 2009, at 18:11, Oguzhan Kayhan wrote: > >> Hello, >> I am trying to install my E1 card to make a conection with an Ericsson >> MD-110 PBX. >> I installed dahdi drivers as: >> dahdi_hardware >> pci:0000:04:08.0 wcte12xp- d161:8000 Wildcard TE121 >> ran dahdi_genconf and it created all my e1 ports. >> On the other side i also configured the pbx to communicate with TE121. >> On ericsson side, i have no error messages. >> On asterisk side, no error messages. >> But when i try to create a dahdi trunk, and dial it from asterisk , no >> call can be made. >> and also, when i try to call from ericsson side, i get line busy >> message >> as soon as i dial the number. >> >> Is there any guide that can help me in installing that card? >> >> PS: Whatever i made in SPAN config, everytime the only thing i see was >> Internal clock on dahdi_tool . How can i make my e1 card master (or >> slave >> whatever) instead of internal clock?? >> >> and other thing i wonder, >> if i create a span like "span=1,0,0,ccs,hdb3" is it zap/g1 in >> zaptel(dahdi) conf menu in asteriskgui???(or freepbx) >> >> >> >> >> _______________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users > > Tim Panton - Web/VoIP consultant and implementor > www.westhawk.co.uk > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users