I attached the show channels in my first post, but removed it to reduce the length of replies. Here it is again along with show status. Note that there is only 1 PRI currently attached.
geriatrix*CLI> dahdi show status Description Alarms IRQ bpviol CRC4 T2XXP (PCI) Card 0 Span 1 OK 0 0 0 T2XXP (PCI) Card 0 Span 2 RED 0 0 0 geriatrix*CLI> dahdi show channels Chan Extension Context Language MOH Interpret pseudo default default 1 DID_span_1 default 2 DID_span_1 default 3 DID_span_1 default 4 DID_span_1 default 5 DID_span_1 default 6 DID_span_1 default 7 DID_span_1 default 8 DID_span_1 default 9 DID_span_1 default 10 DID_span_1 default 11 DID_span_1 default 12 DID_span_1 default 13 DID_span_1 default 14 DID_span_1 default 15 DID_span_1 default 16 DID_span_1 default 17 DID_span_1 default 18 DID_span_1 default 19 DID_span_1 default 20 DID_span_1 default 21 DID_span_1 default 22 DID_span_1 default 23 DID_span_1 default 25 DID_span_2 default 26 DID_span_2 default 27 DID_span_2 default 28 DID_span_2 default 29 DID_span_2 default 30 DID_span_2 default 31 DID_span_2 default 32 DID_span_2 default 33 DID_span_2 default 34 DID_span_2 default 35 DID_span_2 default 36 DID_span_2 default 37 DID_span_2 default 38 DID_span_2 default 39 DID_span_2 default 40 DID_span_2 default 41 DID_span_2 default 42 DID_span_2 default 43 DID_span_2 default 44 DID_span_2 default 45 DID_span_2 default 46 DID_span_2 default 47 DID_span_2 default On 19/5/09 6:31 PM, "Danny Nicholas" <da...@debsinc.com> wrote: > Please post your CLI output from dahdi show status and dahdi show channels. > > -----Original Message----- > From: asterisk-users-boun...@lists.digium.com > [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Kal Feher > Sent: Tuesday, May 19, 2009 11:22 AM > To: asterisk-users@lists.digium.com > Subject: Re: [asterisk-users] Unable to make outbound calls > > >> Can you make an outbound call after your first incoming call? That's what > I > experienced with 1.4.24. > > No I can't. I saw similar threads while searching for a solution, but in my > case outbound calls are never possible. > > > Regardless, thank you for your suggestion. > > On 19/5/09 4:47 PM, "Kal Feher" <kalman.fe...@melbourneit.com.au> wrote: > >>> I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2 >>> >>> I've got a 2 port T2XXP card attached with on T1 currently plugged in. >>> >>> Inbound calls work fine, but outbound fail with the rather cryptic: >>> [May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full: Unable > to >>> create channel of type 'DAHDI' (cause 0 - Unknown) >>> >>> There are similar threads I've found on the net but they tend to be > related > to >>> dahdi not being loaded or similar. In my case dahdi is loaded and > channels >>> visible. >>> >>> I've rsync'd a configuration (/etc/asterisk and /etc/dahdi) from another >>> server that is currently working fine. But still no luck. >>> >>> Any hints would be appreciated. In particular if someone can suggest some >>> documentation on what _could_ cause a (cause 0 - Unknown) then I can >>> investigate those. >>> >>> Some details below: >>> <removed in reply to keep email readable> > -- Kal _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users