My thoughts exactly. I've tried National2, 4ess and now ni1 ni1 just worked on Asterisk 1.4.22. (failover box I downgraded). So I'm swapping back to 1.4.24 to test that now.
On 26/5/09 3:34 PM, "Danny Nicholas" <da...@debsinc.com> wrote: > Based on this link - > http://www.trixbox.org/forums/vendor-forums-certified/sangoma/a101dx-hangup- > cause-code-90-outbound-calls > > I'd check my polarity settings in dahdi.conf. Maybe signaling? > > -----Original Message----- > From: asterisk-users-boun...@lists.digium.com > [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Kal Feher > Sent: Tuesday, May 26, 2009 8:22 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Unable to make outbound calls > > Sorry. I don't get many opportunities to test this system as its live. Here > are the results: > > -- Executing [...@dlpn_dialplan1:1] Dial("SIP/19722-b650fb80", "DAHDI/1") > in new stack > -- Requested transfer capability: 0x00 - SPEECH > -- Called 1 > -- Channel 0/1, span 1 got hangup, cause 90 > WARNING[6454]: app_dial.c:765 wait_for_answer: Unable to forward voice or > dtmf > -- Hungup 'DAHDI/1-1' > == Everyone is busy/congested at this time (1:0/0/1) > > > On 20/5/09 3:52 PM, "Danny Nicholas" <da...@debsinc.com> wrote: > >> This all looks ok. What happens if you try to access the DAHDI channel >> outside of Asterisk control: >> In dialplan >> Exten => 9,1,Dial(DAHDI/1) >> >> Dial 9 >> Get dialtone >> Dial number >> >> >> -----Original Message----- >> From: asterisk-users-boun...@lists.digium.com >> [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Kal Feher >> Sent: Wednesday, May 20, 2009 2:55 AM >> To: Asterisk Users Mailing List - Non-Commercial Discussion >> Subject: Re: [asterisk-users] Unable to make outbound calls >> >> I attached the show channels in my first post, but removed it to reduce > the >> length of replies. Here it is again along with show status. >> Note that there is only 1 PRI currently attached. >> >> geriatrix*CLI> dahdi show status >> Description Alarms IRQ bpviol >> CRC4 >> T2XXP (PCI) Card 0 Span 1 OK 0 0 > 0 >> T2XXP (PCI) Card 0 Span 2 RED 0 0 > 0 >> >> geriatrix*CLI> dahdi show channels >> Chan Extension Context Language MOH Interpret >> pseudo default default >> 1 DID_span_1 default >> 2 DID_span_1 default >> 3 DID_span_1 default >> 4 DID_span_1 default >> 5 DID_span_1 default >> 6 DID_span_1 default >> 7 DID_span_1 default >> 8 DID_span_1 default >> 9 DID_span_1 default >> 10 DID_span_1 default >> 11 DID_span_1 default >> 12 DID_span_1 default >> 13 DID_span_1 default >> 14 DID_span_1 default >> 15 DID_span_1 default >> 16 DID_span_1 default >> 17 DID_span_1 default >> 18 DID_span_1 default >> 19 DID_span_1 default >> 20 DID_span_1 default >> 21 DID_span_1 default >> 22 DID_span_1 default >> 23 DID_span_1 default >> 25 DID_span_2 default >> 26 DID_span_2 default >> 27 DID_span_2 default >> 28 DID_span_2 default >> 29 DID_span_2 default >> 30 DID_span_2 default >> 31 DID_span_2 default >> 32 DID_span_2 default >> 33 DID_span_2 default >> 34 DID_span_2 default >> 35 DID_span_2 default >> 36 DID_span_2 default >> 37 DID_span_2 default >> 38 DID_span_2 default >> 39 DID_span_2 default >> 40 DID_span_2 default >> 41 DID_span_2 default >> 42 DID_span_2 default >> 43 DID_span_2 default >> 44 DID_span_2 default >> 45 DID_span_2 default >> 46 DID_span_2 default >> 47 DID_span_2 default >> >> >> >> On 19/5/09 6:31 PM, "Danny Nicholas" <da...@debsinc.com> wrote: >> >>> Please post your CLI output from dahdi show status and dahdi show >> channels. >>> >>> -----Original Message----- >>> From: asterisk-users-boun...@lists.digium.com >>> [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Kal Feher >>> Sent: Tuesday, May 19, 2009 11:22 AM >>> To: asterisk-users@lists.digium.com >>> Subject: Re: [asterisk-users] Unable to make outbound calls >>> >>> >>>> Can you make an outbound call after your first incoming call? That's >> what >>> I >>> experienced with 1.4.24. >>> >>> No I can't. I saw similar threads while searching for a solution, but in >> my >>> case outbound calls are never possible. >>> >>> >>> Regardless, thank you for your suggestion. >>> >>> On 19/5/09 4:47 PM, "Kal Feher" <kalman.fe...@melbourneit.com.au> wrote: >>> >>>>> I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2 >>>>> >>>>> I've got a 2 port T2XXP card attached with on T1 currently plugged in. >>>>> >>>>> Inbound calls work fine, but outbound fail with the rather cryptic: >>>>> [May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full: > Unable >>> to >>>>> create channel of type 'DAHDI' (cause 0 - Unknown) >>>>> >>>>> There are similar threads I've found on the net but they tend to be >>> related >>> to >>>>> dahdi not being loaded or similar. In my case dahdi is loaded and >>> channels >>>>> visible. >>>>> >>>>> I've rsync'd a configuration (/etc/asterisk and /etc/dahdi) from > another >>>>> server that is currently working fine. But still no luck. >>>>> >>>>> Any hints would be appreciated. In particular if someone can suggest >> some >>>>> documentation on what _could_ cause a (cause 0 - Unknown) then I can >>>>> investigate those. >>>>> >>>>> Some details below: >>>>> <removed in reply to keep email readable> >>> -- Kal _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users