On Mar 2, 2010, at 6:27 PM, sean darcy wrote: > I've just got Uverse installed. I had dsl, but ATT insisted I couldn't > keep my old dsl, but had to switch to Uverse internet - vdsl. > > My setup: > > linux box as router : 10.10.11.252 > > asterisk box: 10.10.11.180 > > 10.10.11.252 is multihomed and connected to the Uverse Residential > Gateway. I've set it up as DMZplus, and it shows the public ip address > as eth1. I can ssh into the linux box from outside. > > sip worked fine with dsl. I used teliax, junction and direct sip to the > asterisk box in the office. I can ssh from 10.10.11.180 to the office. > > But not now. The asterisk box sends out sip messages, but nothing comes > in. In the office asterisk box, I don't see the sip messages come in. > > Is anybody using sip behind a Uverse RG? Care to share the magic? > > sean
Sean, I had att u-verse up until a week ago and loved it. Ran Asterisk behind it with great success. (I only left u-verse because of a physical move). Anyway, by default the u-verse router simply will block upd like noone's business. Make sure you have a firewall and then tell the u-verse router to open everything to that firewall (and proceed like you did on dsl). If you change the mac of your firewall, you'll need to reauth it again. ---fred http://qxork.com -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
