Hi,
I've run into a veird problem. I'm using a B400P BRI and an A1200P card with dahdi (2.2.1) driver. The dahdi_scan shows the each moduls and spans, everything seems fine. With dahdi_genconf I made the config, set up the channels in chan_dahdi.conf, but after reboot, the two card changes the order, (originaly the B400P is the first (closer to the processor) and A1200P is the second), when I check with dahdi_scan, it shows the channels are not in the original order. I set the Card ID Switch to 0 on B400P but it does not solve the problem. I tried these cards with another motherboard, the situation is the same so it's not chipset specific. Please let me know if there is any solution. Thank you for your help in advance. Best regards, Peter -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
