2010.04.20. 16:50 keltezéssel, Shaun Ruffell írta: > On 04/19/2010 03:48 AM, Peter Gelencser wrote: >> I've run into a veird problem. I'm using a B400P BRI and an A1200P card >> with dahdi (2.2.1) driver. The dahdi_scan shows the each moduls and >> spans, everything seems fine. With dahdi_genconf I made the config, set >> up the channels in chan_dahdi.conf, but after reboot, the two card >> changes the order, (originaly the B400P is the first (closer to the >> processor) and A1200P is the second), when I check with dahdi_scan, it >> shows the channels are not in the original order. I set the Card ID >> Switch to 0 on B400P but it does not solve the problem. I tried these >> cards with another motherboard, the situation is the same so it's not >> chipset specific. >> >> Please let me know if there is any solution. Thank you for your help in >> advance. >> > > Peter, > > I'm not familiar with the A1200P, but I suspect the A1200P not blacklisted in > /etc/modprobe.d. Therefore when you reboot, it's driver is loaded by udev > before the rest of the DAHDI drivers are loaded. > > Try adding the driver for the A1200P to /etc/modprobe.d/dahdi.blacklist to > make sure that the drivers are loaded by any configuration scripts in > /etc/init.d in a consistent order. > > Cheers,
That was the solutions, thanks for the tip. Best regards, Peter Gelencser -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users