Thanks for the reply!
i'll try to install asterisk on the same machine
--------------------------------------------------
From: "Lee Howard" <fax...@howardsilvan.com>
Sent: Thursday, September 01, 2011 6:29 PM
To: <ales...@asistar.it>
Cc: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Subject: Re: [asterisk-users] problems with hylafax + iaxmodem +
asterisk1.8.5
Alessio wrote:
I have 2 computers in the lan, one is the Asterisk PBX and the other is
the server with hylafax and iaxmodem installed.
.....
Sep 1 16:50:11 FAXServer FaxGetty[6225]: --> [4:RING]
Sep 1 16:50:11 FAXServer FaxGetty[6225]: ANSWER: Call ID 1 "06654321"
Sep 1 16:50:11 FAXServer FaxGetty[6225]: ANSWER: Call ID 2 ""
Sep 1 16:50:11 FAXServer FaxGetty[6225]: ANSWER: Call ID 3 "<NONE>"
Sep 1 16:50:11 FAXServer FaxGetty[6225]: ANSWER: Call ID 4 "s"
Sep 1 16:50:11 FAXServer FaxGetty[6225]: STATE CHANGE: LISTENING ->
ANSWERING
Sep 1 16:50:12 FAXServer FaxGetty[6225]: ANSWER: Ring detected without
successful handshake
Sep 1 16:50:12 FAXServer FaxGetty[6225]: <-- [5:ATH0\r]
Sep 1 16:50:12 FAXServer FaxGetty[6225]: --> [2:OK]
It happens so quickly that I would suspect that it has to do with fax
detection within Asterisk re-routing the call to a different place. Watch
the CLI when a fax call comes in and see what happens there.
However, let me say now that your setup that you describe strings the IAX2
channels out over your LAN which is no guarantee that there won't be
jitter to cause you other problems. Normally iaxmodem (and probably
therefore HylaFAX) should run on the same system as Asterisk.
Thanks,
Lee.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
