G.Day!
Thanks for the response!
i've tryed to do this, but in /var/spool/hylafax/log/xferfaxlog
I read this:
09/06/11 09:04 CALL 000000108 ttyIAX "" fax
"+39.06.456789" "" 0 0 0:00:09 0:00:09 "Failure to
receive silence (synchronization failure)." "" "06654321"
"<NONE>::s" "" ""
what is it?!
--------------------------------------------------
From: "Larry Moore" <lmo...@starwon.com.au>
Sent: Monday, September 05, 2011 10:24 PM
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Subject: Re: [asterisk-users] problems with hylafax + iaxmodem
+asterisk1.8.5
On 5/09/2011 10:05 PM, Alessio wrote:
someone can help me to solve this problem?
thanks
--------------------------------------------------
From: "Alessio" <ales...@asistar.it>
Sent: Friday, September 02, 2011 5:10 PM
To: "Lee Howard" <fax...@howardsilvan.com>
Cc: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Subject: Re: [asterisk-users] problems with hylafax + iaxmodem
+asterisk1.8.5
1: from the phone i called the fax-server
2: from external fax i tried to send a fax to fax-server
the results:
_
G'Day Alessio,
I replied to your original post suggesting you set up two IAX modems and
get successful transmission working between them.
I suspect you want to use T.38 with IAX modem, I don't believe the IAX2
channel supports T.38 hence I would suggest you remove the t38pt_udptl
lines from your iax.conf files to avoid confusion.
I am assuming you are receiving your incoming facsimile using SIP, if so I
would suggest you have only one reference to t38pt_udptl in that peers
configuration and set it to "no".
Depending on whether the peer is dedicated to receiving facsimiles I would
suggest you also include in your peer's configuration faxdetect=no
otherwise if this is an Audio/FAX line I would suggest you set it to
faxdetect=cng.
Once you have this working but really want to use T.38 then you will need
to apply the T.38 Gateway patch to your 1.8.5.0 build, see
https://issues.asterisk.org/view.php?id=13405 .
Changes you will need to make to your SIP peer is to set t38pt_udptl=yes
and in your dial plan before the Dial() enable the gateway with
Set(FAXOPT(t38gateway)=yes).
Larry.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users