You are set up as a USA PRI, but not dialing a USA TN. -----Original Message----- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of motty.cruz Sent: Wednesday, September 26, 2012 11:13 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Re: [asterisk-users] Asterisk 1.8.15.0, Requested transfer capability: 0x00 - SPEECH
-----Original Message----- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Paul Belanger Sent: Wednesday, September 26, 2012 7:52 AM To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] Asterisk 1.8.15.0, Requested transfer capability: 0x00 - SPEECH On 12-09-26 10:35 AM, motty.cruz wrote: > Hello, > I'm having issues connecting throu PRI with the following error > "Requested transfer capability: 0x00 - SPEECH" > > Below are the logs: > > > > == Using SIP RTP CoS mark 5 > -- Executing [97052660@voipphones:1] Set("SIP/4856-00000003", > "CALLERID(num)=xxxxxxxxx") in new stack > -- Executing [97052660@voipphones:2] Dial("SIP/4856-00000003", > "dahdi/g1/97052660") in new stack > -- Requested transfer capability: 0x00 - SPEECH > -- Called dahdi/g1/97052660 > -- Span 1: Channel 0/1 got hangup, cause 27 > -- DAHDI/i1/97052660-4 is circuit-busy > -- Hungup 'DAHDI/i1/97052660-4' > == Everyone is busy/congested at this time (1:0/1/0) > -- Auto fallthrough, channel 'SIP/4856-00000003' status is 'CONGESTION' > > /etc/asterisk > Chan_dahdi.conf > > [trunkgroups] > [channels] > ; PRI to Telco > callerid=asreceived > context=fromtelco > switchtype=national > signalling=pri_cpe > group=1 > channel => 1-23 > > ; pri to PBX > context=frompbx > switchtype=national > signalling=pri_net > group=2 > channel => 25-47 > > In /etc/dahdi > Modules > > Wct4xxp > > /etc/dahdi > System.conf > > # PRI to Telco > span=1,1,0,esf,b8zs > bchan=1-23 > dchan=24 > > # PRI to PBX > span=2,0,0,esf,b8zs > bchan=25-47 > dchan=48 > > > Any suggestoins are welcome! > Thanks in advance! > You are dialing a 8 digit number. Why? /* I'm dialing 8 digits because in my extensions.conf required user to dial 9 for outgoing calls. */ Also: Cause No. 27 - destination out of order. This cause indicates that the destination indicated by the user cannot be reached because the interface to the destination is not functioning correctly. The term "not functioning correctly" indicates that a signal message was unable to be delivered to the remote party; e.g., a physical layer or data link layer failure at the remote party or user equipment off-line. /* thanks for pointing that out, I overlook "Cause No. 27". I will check aging my Dahdi configuration */ -- Paul Belanger | PolyBeacon, Inc. Jabber: paul.belan...@polybeacon.com | IRC: pabelanger (Freenode) Github: https://github.com/pabelanger | Twitter: https://twitter.com/pabelanger -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
