On 12-09-26 11:12 AM, motty.cruz wrote:
-----Original Message-----
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Paul Belanger
Sent: Wednesday, September 26, 2012 7:52 AM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] Asterisk 1.8.15.0, Requested transfer
capability: 0x00 - SPEECH
On 12-09-26 10:35 AM, motty.cruz wrote:
Hello,
I'm having issues connecting throu PRI with the following error
"Requested transfer capability: 0x00 - SPEECH"
Below are the logs:
== Using SIP RTP CoS mark 5
-- Executing [97052660@voipphones:1] Set("SIP/4856-00000003",
"CALLERID(num)=xxxxxxxxx") in new stack
-- Executing [97052660@voipphones:2] Dial("SIP/4856-00000003",
"dahdi/g1/97052660") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called dahdi/g1/97052660
-- Span 1: Channel 0/1 got hangup, cause 27
-- DAHDI/i1/97052660-4 is circuit-busy
-- Hungup 'DAHDI/i1/97052660-4'
== Everyone is busy/congested at this time (1:0/1/0)
-- Auto fallthrough, channel 'SIP/4856-00000003' status is
'CONGESTION'
/etc/asterisk
Chan_dahdi.conf
[trunkgroups]
[channels]
; PRI to Telco
callerid=asreceived
context=fromtelco
switchtype=national
signalling=pri_cpe
group=1
channel => 1-23
; pri to PBX
context=frompbx
switchtype=national
signalling=pri_net
group=2
channel => 25-47
In /etc/dahdi
Modules
Wct4xxp
/etc/dahdi
System.conf
# PRI to Telco
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
# PRI to PBX
span=2,0,0,esf,b8zs
bchan=25-47
dchan=48
Any suggestoins are welcome!
Thanks in advance!
You are dialing a 8 digit number. Why?
/* I'm dialing 8 digits because in my extensions.conf required user to dial
9 for outgoing calls. */
Right, but does your CO require you to pass the '9' to them or are you
to strip it?
Also:
Cause No. 27 - destination out of order.
This cause indicates that the destination indicated by the user cannot be
reached because the interface to the destination is not functioning
correctly. The term "not functioning correctly" indicates that a signal
message was unable to be delivered to the remote party; e.g., a physical
layer or data link layer failure at the remote party or user equipment
off-line.
/* thanks for pointing that out, I overlook "Cause No. 27". I will check
aging my Dahdi configuration */
--
Paul Belanger | PolyBeacon, Inc.
Jabber: paul.belan...@polybeacon.com | IRC: pabelanger (Freenode)
Github: https://github.com/pabelanger | Twitter:
https://twitter.com/pabelanger
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to
Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Paul Belanger | PolyBeacon, Inc.
Jabber: paul.belan...@polybeacon.com | IRC: pabelanger (Freenode)
Github: https://github.com/pabelanger | Twitter:
https://twitter.com/pabelanger
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
