Hi, On Tue, Jan 15, 2013 at 09:18:46PM +0000, ted wrote: > Michel Verbraak <michel <at> verbraak.org> writes: > > Op 22-08-12 12:09, Shitian Long > > > > I am trying to setup TE110P wildcard on a PBX running > > ubuntu 12.04 server edition. I followed the procedure > > from http://docs.digium.com/misc/ADL_quickstart.pdf step > > by step. > > > > During the process of installing "dahdi-linux-complete" > > > > I got following warnings: > > > > root <at> ubuntu:/usr/local/src/dahdi-linux-complete-2.6.1+2.6.1# > > make > > > > perl: warning: Setting locale failed. > > perl: warning: Please check that your locale settings: > > > > LANGUAGE > > = "en_US:en", > > > > LC_ALL > > = (unset), > > > > LC_CTYPE > > = "UTF-8", > > > > LANG > > = "en_US.UTF-8" > > are supported and installed on your system. > > perl: warning: Falling back to the standard locale ("C"). > > > > Frist of, I am wondering if this error matters?
I do not think this error matters. You probably should still make sure your locale is set properly. > > Second question, after installation process complete, and > > reboot the machine > > > > I got the following error, when machine boot up: > > > > Loading DAHDI hardware modules: > > wcte11xp: error There should be some output in dmesg that indicates what the problem is when you get an error here. > > I think the TE110P card is no properly loaded. > > > > I try to confirm my thought by using > > root <at> ubuntu:~# dahdi_tool > > > > There is no interface listed on the table. > > > > I am wondering if anyone got idea about this issue. Thanks. > > Having the same problems: > > > /# dmesg -c > /dev/null > /# /etc/init.d/dahdi stop > Unloading DAHDI hardware modules: done > /# modprobe wte11xp > FATAL: Module wte11xp not found. The above is a differnt error than what Shitian reported. It doesn't look like the driver was installed properly for the current kernel. > /# dmesg > [ 2775.316252] dahdi: Telephony Interface Unloaded > > /# lspci | grep Dig > /# > > however: > > # make config > install -D dahdi.init /etc/init.d/dahdi > /usr/sbin/update-rc.d dahdi defaults 15 30 > System start/stop links for /etc/init.d/dahdi already exist. > DAHDI has been configured. > > List of detected DAHDI devices: > > pci:0000:03:02.0 wcte11xp- e159:0001 Digium Wildcard TE110P T1/E1 Board > > run 'dahdi_genconf modules' to load support for only > the DAHDI hardware installed in this system. By > default support for all DAHDI hardware is loaded at > DAHDI start. > > > > any ideas? doesnt look like my system recognized the card at all. no lights > on > the card. card was working perfectly. i simply moved it from one box > (gentoo) > to another (ubuntu 12.04) Best guess based on what you said that the driver really isn't installed for the current kernel. Cheers, Shaun -- Shaun Ruffell Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users