Hi. Open http://ip.of.your.ata/dev and set LoginID0: and LoginID1: to your login Id. Then set UseLoginID: to 1.
If you haven't already, set a password on the ATA by entering it into the UIPassword: field. This field does not have repeat to confirm, so type carefully. Last but not least, there is a bug in the v3.0 code for the 186's. If you use the TOS bit's to mark SIP for QOS, downgrade back to 2.1.6. In 3.0, the ata sets TOS to 0x0, and ignores the TOS: configuration field. Hope that helps, Ejay Hire ISDN-Net Network Engineer ...Providing VoIP services to Tennessee businesses since 2003 > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Erick Weber V. > Sent: Monday, February 23, 2004 5:24 PM > To: [EMAIL PROTECTED] > Subject: [Asterisk-Users] ATA 186 Registration!!!! > > I'm tring to register my ATA to * and I getting the following message: > > Feb 23 18:13:04 NOTICE[1125329600]: chan_sip.c:5405 handle_request: > Registration from '<sip:[EMAIL PROTECTED] user=phone>' failed for > 'xxx.xxx.xxx.xxx' > > I don't know what's wrong an why it register as user=phone??? > > Coul some one help me!!!! > > Thanks > > Erick > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
