On Tue, Jun 24, 2014 at 5:25 AM, arun kumar <arunvsadni...@gmail.com> wrote:
> Hello All, > > I have a Digium Wildcard TE410P Quad-Span T1 Card, when I do connect > T1 lines it goes in RED. When I do connect the same line on a different > Server (Same Model T1 Card) it works fine. How do I examine/diagnose my T1 > Card for any hardware failures. I heard about loopback test , how helpful > it is? > > Here are my configuration > /etc/zaptel.conf > span=1,1,0,esf,b8zs > bchan=1-23 > dchan=24 > > Zaptel Configuration > ====================== > SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) > 24 channels configured > > Thanks > ~Arun > > It could still be some sort of system config issue, even if you think everything is configured the same. Have you tried moving the T1 card from the "Bad" system to the "good" system? That will at least help narrow down if it's a bad card / port, or a config issue. -Josh
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users