Since there are a number of setting that could be causing the alarm, AMI/B8ZS, SF/ESF, etc...
Start with a loop-test, make sure the card can communicate with itself (using the current settings). Connect the following pins: 01 (RX-) <--> 04 (TX+) 02 (RX+) <--> 05 (TX-) Sincerely, Brian LaVallee On 6/25/14, 1:16 PM, arun kumar wrote: > Cables are workig fine in my other box. > On 25 Jun 2014 00:46, "Steve Totaro" <stot...@totarotechnologies.com> wrote: > >> Remember to always check your cables first. >> >> Thanks, >> Steve T >> >> >> On Tue, Jun 24, 2014 at 1:47 PM, arun kumar <arunvsadni...@gmail.com> >> wrote: >> >>> >>> Thank you Josh for your valuable reply. I will do try changing the server >>> and let you know what happening. >>> >>> >>> ~Arun >>> >>> >>> On Tue, Jun 24, 2014 at 8:39 PM, Josh Metzger <joshdmetz...@gmail.com> >>> wrote: >>> >>>> >>>> >>>> On Tue, Jun 24, 2014 at 5:25 AM, arun kumar <arunvsadni...@gmail.com> >>>> wrote: >>>> >>>>> Hello All, >>>>> >>>>> I have a Digium Wildcard TE410P Quad-Span T1 Card, when I do >>>>> connect T1 lines it goes in RED. When I do connect the same line on a >>>>> different Server (Same Model T1 Card) it works fine. How do I >>>>> examine/diagnose my T1 Card for any hardware failures. I heard about >>>>> loopback test , how helpful it is? >>>>> >>>>> Here are my configuration >>>>> /etc/zaptel.conf >>>>> span=1,1,0,esf,b8zs >>>>> bchan=1-23 >>>>> dchan=24 >>>>> >>>>> Zaptel Configuration >>>>> ====================== >>>>> SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) >>>>> 24 channels configured >>>>> >>>>> Thanks >>>>> ~Arun >>>>> >>>>> >>>> It could still be some sort of system config issue, even if you think >>>> everything is configured the same. Have you tried moving the T1 card from >>>> the "Bad" system to the "good" system? That will at least help narrow down >>>> if it's a bad card / port, or a config issue. >>>> >>>> -Josh >>>> >>>> -- >>>> _____________________________________________________________________ >>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>> New to Asterisk? Join us for a live introductory webinar every Thurs: >>>> http://www.asterisk.org/hello >>>> >>>> asterisk-users mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-users >>>> >>> >>> >>> -- >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> New to Asterisk? Join us for a live introductory webinar every Thurs: >>> http://www.asterisk.org/hello >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> New to Asterisk? Join us for a live introductory webinar every Thurs: >> http://www.asterisk.org/hello >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > > -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users