Try turning off BUILD_NATIVE in menuselect. This will eliminate optimizations for the processor you last compiled on, which prevents crashes due to instructions not present on a different processor. This is frequently necessary when using in virtual environments.
In cli form: # menuselect/menuselect --disable BUILD_NATIVE On Wed, Jul 1, 2015 at 1:36 PM, Jeff LaCoursiere <j...@jeff.net> wrote: > > Howdy, > > I built an LXC container with an "image" of asterisk 11.18 precompiled and > installed. It runs fine on the dev platform, which is a Dell R320 running > Ubuntu 14.04LTS. I shutdown the container, tarred it up, and untarred on a > Dell PE1850, also running Ubuntu 14.04LTS. The container itself is Ubuntu > 14.04LTS. Both platforms as far as I know are amd64. > > The container boots fine on the 1850, but trying to run asterisk > segfaults. The source tree was still in the container, so I just did a > make clean; make; make install. It now runs fine. > > Is there some compile flag I could use to make sure it is more > "compatible" as I copy the container around? Can anyone suggest a debug > sequence that would at least narrow down what is causing the fault? > > Cheers, > > j > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- [image: Digium logo] Scott Griepentrog Digium, Inc · Software Developer 445 Jan Davis Drive NW · Huntsville, AL 35806 · US direct/fax: +1 256 428 6239 · mobile: +1 256 580 6090 Check us out at: http://digium.com · http://asterisk.org
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users