Awesome, that did the trick! Thanks!
j
On 07/01/2015 01:44 PM, Scott Griepentrog wrote:
Try turning off BUILD_NATIVE in menuselect. This will eliminate
optimizations for the processor you last compiled on, which prevents
crashes due to instructions not present on a different processor. This
is frequently necessary when using in virtual environments.
In cli form: # menuselect/menuselect --disable BUILD_NATIVE
On Wed, Jul 1, 2015 at 1:36 PM, Jeff LaCoursiere <j...@jeff.net
<mailto:j...@jeff.net>> wrote:
Howdy,
I built an LXC container with an "image" of asterisk 11.18
precompiled and installed. It runs fine on the dev platform,
which is a Dell R320 running Ubuntu 14.04LTS. I shutdown the
container, tarred it up, and untarred on a Dell PE1850, also
running Ubuntu 14.04LTS. The container itself is Ubuntu
14.04LTS. Both platforms as far as I know are amd64.
The container boots fine on the 1850, but trying to run asterisk
segfaults. The source tree was still in the container, so I just
did a make clean; make; make install. It now runs fine.
Is there some compile flag I could use to make sure it is more
"compatible" as I copy the container around? Can anyone suggest a
debug sequence that would at least narrow down what is causing the
fault?
Cheers,
j
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Digium logo
Scott Griepentrog
Digium, Inc · Software Developer
445 Jan Davis Drive NW · Huntsville, AL 35806 · US
direct/fax: +1 256 428 6239 · mobile: +1 256 580 6090
Check us out at: http://digium.com · http://asterisk.org
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
