Hi, This seems to be an issue of terminology,
On Thu, Sep 24, 2015 at 05:08:24PM -0500, Jeff LaCoursiere wrote: > > Hi, > > I have a client that has a 24 channel voice T1 that I have been using e&m > signalling over for a number of years. The local telco finally got an ISDN > switch and wants to move them to PRI. I didn't see this as a big problem - > I've done a few others on this particular Caribbean island without issues, > but this would be the first time with a Xorcom unit involved. > > We tried to do it tonight and failed. I suspect there is an issue at their > central office where they patched the line away from an old dms-100 and to > the new ISDN switch - the tech said he couldn't see anything at the line > layer, though I showed no alarms. Regardless, something odd happened that I > am hoping for some advice on. We reverted to the T1 and will try again next > week. > > The odd bit is this - lsdahdi showed all 24 channels as "T1" instead of > "PRI". The output of lsdahdi at another site where I had already done this > conversion (which uses a Sangoma card) looks like this: > > root@astsouth:/etc/dahdi# lsdahdi > ### Span 1: WPT1/0 "wanpipe1 card 0" (MASTER) ESF/B8ZS > 1 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 2 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 3 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 4 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 5 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 6 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 7 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 8 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 9 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 10 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 11 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 12 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 13 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 14 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 15 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 16 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 17 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 18 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 19 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 20 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 21 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 22 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 23 PRI Clear (In use) (EC: WANPIPE_HWEC - INACTIVE) > 24 PRI Hardware-assisted HDLC (In use) (EC: WANPIPE_HWEC - > INACTIVE) > > Bah, the scrollback has already erased the output from the box in question, > but essentially it showed the same as above with "T1" in the second column > for all channels instead of "PRI". Right. For Sangoma cards, lsdahdi can't tell if the port is E1 or T1 and thus calls it "PRI". Note that "PRI" here is a poor name that refers to the port type itself and not to the signalling in it (which don't have to be ISDN). Suggestions? Patches? -- Tzafrir Cohen icq#16849755 jabber:tzafrir.co...@xorcom.com +972-50-7952406 mailto:tzafrir.co...@xorcom.com http://www.xorcom.com -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users